Set Output Using Scpi Commands

2 Features and Functions

OUTPut {OFFON}

The APPLy command overrides the current setting and automatically enables the output control.

The following SCPI commands show a sample procedure of generating output.

Example 1, To output a DC voltage

-> CLS; RST	//To reset the U2761A to default
	power-on state, this command
	can be ignored if this operation
	is not required.
-> FUNC DC	//Sets the output to DC.
-> VOLT:OFFS 1	//Sets the output DC offset voltage
	to 1 VDC.
-> OUTP:LOAD INF	//Changes the output termination
	to infinity.
-> OUTP ON	//Turns on output.

42	U2761A User’s Guide