Agilent Technologies U2761A Output Units, Soft Front Panel Operation, Remote Interface Operation

Features and Functions 2

Output Units

This configuration applies to output amplitude only. At power-on, the units for output amplitude are volts peak-to-peak.

•The output units consist of Vpp, Vrms, or dBm. The default unit is Vpp.

•The unit setting is stored in volatile memory. The units are set to “Vpp” upon power-off or after a remote interface reset.

•The output units for amplitude cannot be set to dBm if the output termination is currently set to

“high impedance”. The units are automatically converted to Vpp.

Soft Front Panel Operation

On the Amplitude panel as shown in Figure 2- 4, input the desired amplitude value and select the unit from the drop down list.

Remote Interface Operation

VOLTage:UNIT {VPPVRMSDBM}

U2761A User’s Guide 35