Agilent Technologies U2761A manual Generate FM Using Scpi Commands

2 Features and Functions

Soft Front Panel Operation

On the Deviation panel as shown in Figure 2- 18, input the desired frequency deviation value and select the unit from the drop down list.

Remote Interface Operation

FM:DEViation {<peak deviation in Hz>}

Generate FM Using SCPI Commands

Example 1
-> *CLS; *RST	//To reset the U2761A to default
	power-on state, this command
	can be ignored if this operation
	is not required.
-> FM:STAT ON	//Enables FM.
-> FUNC SIN	//Sets the carrier waveform to
	Sine wave.
-> FREQ 1000	//Sets the carrier frequency to
	1 kHz.
-> VOLT 5 VPP	//Sets the output amplitude to
	5 Vpp.
-> VOLT:OFFS 0	//Sets the output offset to 0.
-> FM:INT:FUNC SIN	//Changes the modulating
	waveform shape to Sine wave.
-> FM:INT:FREQ 500	//Changes the modulating
	frequency to 500 Hz.
-> FM:DEV 100	//Changes the frequency
	deviation to 100 Hz.
-> OUTP ON	//Turns on output.

60 U2761A User’s Guide