RS-232 COMMANDS
Command Syntax
Each command uses the following syntax:
#Command_Name [Space] Parameter 1 [Space] Parameter n [CR]
Sample:
#FunctionName_param1_param2_param3_param4...\r
Syntax is NOT case sensitive.
| EDID Management |
|
|
Command | Description |
#EDIDDETOLO | Stores the default EDID into all inputs |
#EDIDDSTOLO | Read downstream EDID and stores into all inputs |
#LOEDIDTOLO | Loads EDID from serial port and store in any input |
|
|
#PRDSEDID | Reads downstream EDID and sends it to serial port |
|
|
#PRLOEDID | Reads local input EDID and sends it to serial port |
|
|
#EDIDDETOLO Command
The #EDIDDETOLO command stores the default EDID into the inputs.
Syntax:
#ediddetolo
Parameters:
None
10
