#FOON Command, #STANDBY Command | Gefen EXT-DVI-144DL specs

RS-232 COMMANDS

#FOON Command

The #FOON command enables the +5V of the DVI input channel.

Syntax:

#foon

Parameters:

None

#STANDBY Command

The #STANDBY command enables Standby Mode. In Standby Mode, the Splitter will only consume a maximum of 0.5 Watts.

Syntax:

#standby

Parameters:

None

#WAKEUP Command

The #WAKEUP command disables Standby Mode.

Syntax:

#foon

Parameters:

None

15

Image 18

Gefen EXT-DVI-144DL user manual #FOON Command, #STANDBY Command, #WAKEUP Command

Contents

DVI Dual Link Splitter Technical Support Hours Asking for AssistanceTechnical Support Write To Contents Gefen 14 DVI Dual Link Splitter IntroductionGefen How It Works Operation Notes Features FeaturesPackage Includes Front Panel Layout Front Panel Front Panel Descriptions Back Panel Layout Back Panel Back Panel Descriptions RS-232 Serial Port Connecting the 14 DVI Dual Link Splitter How to Connect the 14 DVI Dual Link SplitterWiring Diagram for the 14 DVI Dual Link Splitter Default Serial Port Settings RS-232 Control RS-232 Commands Command Syntax#EDIDDETOLO Command #EDIDDSTOLO Command #LOEDIDTOLO FunctionClick Transfer Send Text File #PRDSEDID Function #PRLOEDID Function #MASKOUT Command #UNMASKOUT Command #ACTIVEBOLO Command #FOOFF Command #FOON Command #STANDBY Command#WAKEUP Command Firmware Update Firmware Update Procedure Rack EAR Installation Installing the Rack Ears Specifications Warranty Product Registration Rev A2 Nordhoff St., Chatsworth CA