Multi-Tech Systems MT5600BA Command #CID= n Caller ID, Callback Enable/Disable, Escape Sequence

MultiModemII User Guide

Command: #CID=n Caller ID
Values:	n = 0, 1, or 2
Default:	0
Description:	Enables or disables Caller ID recognition and reporting.
#CID=0	Disables Caller ID.
#CID=1	Enables formatted Caller ID reporting of ICLID SDM (Single
	Data Message) and MDM (Multiple Data Message) packets.
#CID=2	Enables unformatted Caller ID reporting of any ICLID packet
	received after the first RING cycle, including SDM, MDM, or
	call waiting packets.
#CID?	Retrieves the current Caller ID mode from the modem.
#CID=? Returns the mode capabilities of the modem in a list with each
	element separated by commas.

Command: #DBn	Callback Enable/Disable
Values:	n = 0 or 1
Default:	0
Description:	Enables or disables callback security. When callback security is
	enabled, phone number memory locations 0–4, used for quick
	dialing and DTR dialing, become unavailable and are replaced
	by callback security memory locations 1–30. The phone num-
	ber memory locations and their contents are restored when
	callback security is disabled.
#DB0	Disables callback security.
#DB1	Enables callback security.

Command: $SBn Serial Port Baud Rate

Values:	n = speed in bits per second
Default:	57600
Description: $SB300		Set serial port to 300 bps.
	$SB1200	Set serial port to 1200 bps.
	$SB2400	Set serial port to 2400 bps.
	$SB4800	Set serial port to 4800 bps.
	$SB9600	Set serial port to 9600 bps.
	$SB19200	Set serial port to 19200 bps.
	$SB38400	Set serial port to 38400 bps.
	$SB57600	Set serial port to 57600 bps.
	$SB115200 Set serial port to 115200 bps.
	$SB230400 Set serial port to 230400 bps.
Command: +++AT<CR>		Escape Sequence
Values:	n/a
Description:	Puts the modem in command mode (and optionally issues a
	command) while remaining online. Type +++AT and up to ten
	command characters, and then press ENTER. Used mostly to is-
	sue the hang-up command: +++ATH<CR>.

48