
MultiModemII User Guide
silence before processing the next part of the command. If silence is not detected within the time set in register S7, the modem returns a NO ANSWER or BUSY code.
^ Toggle data calling tone on or off. Applies only to current dialing attempt.
|
| $ Detect credit card “bong” tone. If the tone is not detected |
|
| within the time specified by S7 (US models), the modem |
|
| aborts the rest of the sequence and hangs up. The character |
|
| should follow the phone number and precede the user’s |
|
| call card number, e.g., ATDT1028806127853500$123456789. |
Command: | DS=y Dial Stored Telephone Number | |
Values: |
| n = |
Default: |
| none |
Description: |
| Dial a number previously stored in directory number y by the |
|
| &Zy=x command. Example: ATDS=3. |
Command: | En | Echo Command Mode Characters |
Values: |
| n = 0 or 1 |
Default: |
| 1 |
Description: | E0 | Do not echo keyboard input to the terminal. |
| E1 | Do echo keyboard input to the terminal. |
Command: | Hn | Hook Control |
Values: |
| n = 0 or 1 |
Default: |
| 0 |
Description: | H0 Go | |
|
| progress. |
| H1 | Go |
|
| mode. |
Command: | In | Information Request |
Values: |
| n = |
Default: |
| None |
Description: | I0 | Display the product code. Example: MT5600BA. |
| I1 | Calculate the ROM checksum and display the least significant |
|
| byte in decimal format. |
| I2 | Calculate the ROM checksum and compare it to the prestored |
|
| checksum, displaying OK if they match, or ERROR if they do not. |
| I3 | Display the controller firmware version (F), the basic model |
|
| (V90), the application code (A), and the interface type code (I) in |
|
| the format |
|
| top and L for low power (PCMCIA). The interface codes are S |
|
| for serial and P for parallel. Example: |
| I4 | Display the |
|
| ASCII format. |
| I5 | Display the country code. Example: 022. |
| I6 | Display the modem data pump model and internal code version. |
|
| Example: |
34