Agilent Technologies U2761A manual Generate AM Using Scpi Commands

2 Features and Functions

Generate AM Using SCPI Commands

Example 1
-> *CLS; *RST	//To reset the U2761A to default
	power-on state, this command
	can be ignored if this operation
	is not required.
-> AM:STAT ON	//Enables AM.
-> FUNC SQU	//Sets the carrier waveform to
	Square wave.
-> FREQ 2000	//Sets the carrier frequency to
	2 kHz.
-> VOLT 5 VPP	//Sets the output amplitude to
	5 Vpp.
-> VOLT:OFFS 0	//Sets the output offset to 0.
-> AM:INT:FUNC SIN	//Changes the modulating
	waveform shape to Sine wave.
-> AM:INT:FREQ 500	//Changes the modulating
	frequency to 500 Hz.
-> AM:DEPT 50	//Changes the modulation depth
	to 50%.
-> OUTP ON	//Turns on output.

54 U2761A User’s Guide