Agilent Technologies U2761A Carrier Waveform, Soft Front Panel Operation, Features and Functions

2 Features and Functions

Soft Front Panel Operation

Click Mod and then select FM as shown in Figure 2- 18. To output the FM waveform, configure the settings for the carrier frequency, output amplitude, offset voltage, modulating frequency, deviation, and the desired waveform.

Figure 2-18Panel view of FM

Remote Interface Operation

FM:STATe {OFFON}

Carrier Waveform

The FM carrier waveform consists of Sine, Square, Ramp, Triangle, or Arbitrary waveform. The default waveform is Sine wave. You cannot use Pulse or DC as the carrier waveform.

Soft Front Panel Operation

For Arbitrary waveforms, select Arb at the top panel as shown in Figure 2- 2 and select the desired waveform

from the drop down list as shown in Figure 2- 16.

56 U2761A User’s Guide