Whirlpool RF375PXW, RF365BXW manual Using your range, Using the Surface Units, Surface Unit Markers

Using your range

Using the Surface Units

Surface Unit Markers

Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF.

The solid dot in the surface unit marker shows which surface unit is turned on by that knob.

Surface Unit Indicator lights

One of the surface unit indicator lights on the control panel will glow when a surface unit is on.

Burn and Fire Hazard Be sure all control knobs are turned to OFF and all indicator lights are OFF when you are not cooking. Someone could be burned or a fire could start if a surface unit is accidentally

lefi ON.

Until you get used to the settings, use the following as a guide. For best results, start cooking at the high settings; then turn the control knob down to continue cooking.

Use HI to start foods cook- ing; to bring liquids to a boil.

Use MED-HI			Use MED			Use MED-LO		Use LO to
to	hold	a	for gravy,			to keep	food	keep	food
rapid		boil; to	puddings			cooking	after	warm	until
fry	chicken		and	icing;	to	starting	it	ready	to
or	pancakes.		cook	large		on a higher		serve.	Set the
			amounts		of	setting.		heat	higher
			vegetables.					or lower
								within	the LO
								band	to	keep
								food	at	the
								temperature
								you want.