Nortel Networks 114200-E manual Static Route to Site Manager Worksheet

	Using Local Boot (the Quick-Start Procedure)
OSPF Worksheet (continued)
Requested Information	Options		Your Response
Enter decimal value in seconds for Poll	Enter the largest number of
Interval [120]:	seconds allowed between Hello
	packets that the router sends to an
(For NBMA only)	inactive NBMA neighbor.
	The router suggests a 120-second
	interval.
Enter IP address of neighbor in dotted	Enter addresses for all NBMA
decimal notation or enter q to quit:	neighbors you want the router to
	communicate with.
(For NBMA only)
	When you finish entering
	addresses, enter q and press the
	Return key.
Enter IP address of neighbor in dotted	Enter addresses for the PPP
decimal notation:	neighbor you want the router to
	communicate with.
(For PPP only)
Static Route to Site Manager Worksheet
Requested Information	Options	Your Response
Destination Network [0.0.0.0]:	Enter the gateway address of the
	destination network. An address
	of 0.0.0.0 specifies the default
	route.
Destination Network Mask [0.0.0.0]:	Enter the subnetwork mask of
	the destination network. A mask
	of 0.0.0.0 specifies the default
	route.
Next-Hop Address:	Enter a next-hop address. All
	static routes require a next-hop
	address in the same subnet as
	the initial IP interface.
			(continued)
114200-E Rev 00			B-11