Nortel Networks 114200-E Connecting to the Integrated V.34 Modem, Connecting a Telephone Cable

Installing and Operating Passport ARN Routers

Connecting to the Integrated V.34 Modem

You connect dial services to the connector on an installed V.34 Modem adapter module.

To connect a telephone cable to the integrated V.34 modem:

1.Connect the RJ-11 telephone cable to the V.34 modem interface (Table 1-17).

Front-panel V.34 modem interface

		COM	Tx	10BaseT
1			Rx
RLSD			Cl
		Serial
Telco	Tx	RLSD
V.34 Modem	Rx	DTR	Tx	10BaseT
			Rx
			Cl

To

RJ-11 telephone receptacle

ARN0071A

Figure 1-17. Connecting a Telephone Cable

2.Connect the other end of the cable to an analog telephone line.

Table 1-2 provides the default settings for the V.34 Modem adapter module.

Note: The default settings for the front-panel V.34 Modem adapter module differ from the default settings for the back-panel V.34 Console Modem module interface. For information about the back-panel V.34 Console Modem and its default settings, see “Connecting a Console Modem” on page 1-27.

1-20 114200-E Rev 00