Nortel Networks 114200-E manual Removing an Adapter Module, To remove a WAN adapter module

Installing a WAN Adapter Module

Removing an Adapter Module

To remove a WAN adapter module:

1.Using a Phillips screwdriver, remove the screw that secures the adapter module you want to remove (Figure 4-3).

1

ISDN

DSU/CSU

2

ARN0033A

Figure 4-3. Removing the Adapter Module Screw

2.Pull the adapter module toward you to detach it from the base module connector in the ARN chassis.

Grasp the adapter module’s metal tab, or insert a thin tool (such as a flathead screwdriver) in the slot on the tab.

Be prepared to apply some force, but stop pulling immediately when the adapter module is free from the base module connector.

3.Slide the adapter module all the way out of the slot.

4.Place the adapter module in an antistatic bag.

5.Go to the next section, “Installing an Adapter Module.”

114200-E Rev 00 4-5