Nortel Networks 114200-E manual Logging in to the Command Line Software, Manager

Starting the ARN

2.While the router is running the EZ-Install procedure, issue a break sequence from the management console.

The ARN monitor login prompt appears.

Note: Be sure to issue a break sequence before the boot process completes. Break sequences can vary, depending on the console type. Some management consoles have specific “Break” keys on their keyboards; other require a key sequence to issue a break (for example, Cntrl-Cor ~ #). For the break sequence for your management console, see the PC/terminal documentation.

Logging in to the Command Line Software

Regardless of the command line software used (ARN monitor or Technician Interface) the procedures to log in are identical.

To log in to the command line:

1.Type the following command (noting the use of an uppercase “M”) at the login prompt and press the Return key:

Manager

The Technician Interface or ARN monitor command line prompt appears. You are now using a command line interface to the router.

2.To use the netboot, directed netboot, or the local boot option, go to one of the following sections that describes the procedure you want to use:

•“Continuing with Netboot” on page 2-8

•“Continuing with Directed Netboot” on page 2-10

•“Continuing with Local Boot (the Quick-Start Procedure)” on page 2-13

114200-E Rev 00 2-7