Nortel Networks 114200-E manual Running the Quick-Start Script, Smds Worksheet

Installing and Operating Passport ARN Routers

SMDS Worksheet

Requested Information	Options	Your Response
Enter 10-digit individual address:	Enter the individual address
	assigned to you by your SMDS
	service provider.
Enter 10-digit group address:	Enter the group address
	assigned to you by your SMDS
	service provider.
Enter 10-digit arp address:	Enter the Address Resolution
	Protocol (ARP) address
	assigned to you by your SMDS
	service provider.

Running the Quick-Start Script

The Quick-Start script is called inst_arn.bat and you run it as part of the Local Boot process.

Note: Before you run the Quick-Start script, make sure you have the completed worksheets with you.

Begin local boot as follows:

1.At the Technician Interface login: prompt, enter Manager to log in.

2.Enter bconfig config local to configure the router to use the local config file when booting.

For information about the bconfig command, see “Using the bconfig Command” on page A-7.

3.Reboot the router by entering boot.

The Technician Interface login prompt appears.

4.Log in to the Technician Interface.

The Technician Interface mounts the local file system and displays a prompt indicating the present working directory.

B-16 114200-E Rev 00