Installing and Operating Passport ARN Routers
Table | Boot Status LEDs |
| |
|
|
|
|
Boot Status |
| Run LED | Boot LED |
|
|
|
|
Local Boot |
| Off | On |
|
|
| |
Netboot (attempting) | Off | Flashing | |
|
|
| |
Netboot (downloading) | Flashing | On | |
|
|
| |
Interrupted (using ARN monitor) | Flashing | Flashing | |
|
|
|
|
•After the boot process completes, the Run LED lights and the Boot LED turns off, indicating that the ARN is operational.
If the LEDs on the ARN light in this sequence, your installation is successful. Contact your network administrator to verify that the ARN is now connected to the network.
If the LEDs do not light in this sequence, your network administrator can refer to Configuring Remote Access for AN and Passport ARN Routers to help troubleshoot the problem.
Note: If the ARN does not contain an expansion module, an adapter module, a redundant power supply, a data collection module, or a flash card, the LEDs associated with these components remain off.
If you need additional assistance, contact your local Nortel Networks Technical Solutions Center.
