Sun Microsystems 805-1797-10 Booting From the Network, Reboot your system, At the ok prompt type

3.Create an appropriate entry in the /etc/hosts file for each active qfe channel. Using the example in Step 1 on page 11, you will have:

#cat /etc/hosts

#Internet host table

127.0.0.1localhost

129.144.10.57 zardoz	loghost
129.144.11.83 zardoz-11
129.144.12.41 zardoz-12
129.144.13.67 zardoz-13
129.144.14.30 zardoz-14

4. Reboot your system.

Booting From the Network

To use a Sun Quad FastEthernet PCI adapter ethernet interface as the boot device, perform the following tasks:

1. At the ok prompt type:

ok show-devs

The show-devscommand lists the system devices. You should see the full path name of the qfe devices, similar to the example below:

/pci@1f,2000/pci@2/SUNW,qfe@0,1

/pci@1f,2000/pci@2/SUNW,qfe@1,1

/pci@1f,2000/pci@2/SUNW,qfe@2,1

/pci@1f,2000/pci@2/SUNW,qfe@3,1

Note - You need to select only one of these qfe devices for booting.

2. At the ok prompt type:

ok boot (full path name of the qfe device)

Configuring the Driver Software 13