Sun Microsystems 805-1797-10 manual Set the auto-boot?configuration parameter to true

The following tests are run when the test command is executed: hme register

MAC internal loopback

External loopback

4100 Mbps PHY loopback

10 Mbps PHY loopback

If the test passes, you will see these messages:

Hme register test	--- succeeded.
Internal loopback	test -- succeeded
Transceiver check	-- Using onboard transceiver -- Link up
passed

If the channel is not connected to a network, you will see the following error messages:

Hme register test --- succeeded. Internal loopback test -- succeeded

Transceiver check -- Using onboard transceiver -- Link down Autonegotiation timeout

Check Cable or contact system administrator Failed

selftest failed. return code = -1

Note - To test other channels of the adapter, you will need to execute the test command separately on each channel.

7.After testing the adapter, type the following to return the OpenBoot PROM to standard operating mode:

ok setenv diag-switch? false

8. Set the auto-boot?configuration parameter to true.

ok setenv auto-boot? true

9. Reset and reboot the system.

ok reset-all

Running Diagnostics Tests 43