Nortel Networks 114200-E manual Console Parameters, Parameter Value

Installing and Operating Passport ARN Routers

When you have the appropriate equipment, complete the following steps:

1.Turn on and configure the terminal, using the parameters in Table 1-3 and the terminal user guide.

Table 1-3.	Console Parameters
Parameter		Value
Baud Rate		9600
Data Bits		8
Stop Bits		1
Parity		None

2.Turn off the terminal.

3.Insert the 9-pin receptacle end of the console cable into the ARN Console connector.

4.Attach the null modem crossover adapter to the 25-pin connector.

Insert the screw on the cable connector into the receptacle on the adapter connector and tighten the screw (refer to Figure 1-20 on page 1-24).

5.Attach the 25-pin receptacle connector on the combined cable and adapter to the console host connector (Figure 1-22).

COMM

20 mA PR KB

UL

Redundant Power

1.2A	UL
100-240~
50-60Hz

Console Modem

Console cable plus null modem adapter

ARN0058A

Figure 1-22. Connecting a Terminal Console to an ARN

1-26 114200-E Rev 00