Nokia WAP and SMS gateway Ota-setting. Any string is, For your WAP services, i.e, PPP connection

Chapter 5. Setting up a SMS Gateway

phone as a XML document, but this method is perhaps more suitable for continous provisioning.

If you want to send multiple OTA configurations through the smsbox and you do not want to send XML documents, you will have to declare a ota-idstring to the different ota-settinggroups.

Table 5-13. OTA Setting Group Variables
Variable	Value	Description
group	ota-setting	This is a mandatory variable
		An optional name or id for the
		ota-setting. Any string is
		acceptable, but semicolon ’;’
		may cause problems, so avoid it
		and any other special
ota-id	string	non-alphabet characters.
		The address of the HTTP server
		for your WAP services, i.e.
location	URL	http://wap.company.com
service	string	Description of the service
		IP address of your WAP gateway
ipaddress	IP
		Phone number used to establish
phonenumber	phone-number	the PPP connection
		Connection speed: 9600 or
speed	number	14400. Defaults to 9600.
		Bearer type: data or sms.
bearer	string	Defaults to data.
		Call type: isdn or analog.
calltype	string	Defaults to isdn.
		Connection type: cont or temp.
		Cont uses TCP port 9201 and
		Temp uses UDP port 9200.
connection	string	Defaults to cont.
		Enable CHAP authentication if
pppsecurity	on or off	set to on, PAP otherwise
		normal or secure. Indicates
		wether WTLS should be used or
authentication		not. Defaults to normal.
login	string	Login name.
secret	string	Login password

A sample ’ota-setting’ group:

group = ota-setting

location = http://wap.company.com

service = "Our company’s WAP site"

ipaddress = 10.11.12.13

73