Nokia WAP and SMS gateway manual Service. This may be used to, Allow only inbound SMS to

		Chapter 5. Setting up a SMS Gateway
Variable	Value	Description
		A list of phone number prefixes
		of the receiver number which are
		accepted to be received by this
		service. This may be used to
		allow only inbound SMS to
		certain shortcut numbers to be
allowed-receiver-prefix	prefix-list	allowed to this service.
		A list of phone number prefixes
		of the receiver number which are
		NOT accepted to be sent through
denied-receiver-prefix	prefix-list	this SMSC.
		Catch keyword regardless of
catch-all	bool	’%s’ parameters in pattern.
		Used only with POST. If set to
		true, number of the handset is
send-sender	bool	set, otherwise not.
		Used only with POST. Remove
		matched keyword from message
strip-keyword	bool	text before sending it onward.
		This number is set as sender.
		Most SMS centers ignore this,
		and use their fixed number
		instead. This option overrides all
faked-sender	phone-number	other sender setting methods.
		If the message to be sent is
		longer than maximum length of
		an SMS it will be split into
		several parts. max-messages
		lets you specify a maximum
		number of individual SMS
		messages that can be used. If
		max-messagesis set to 0, no
		reply is sent, except for error
max-messages	number	messages.
		Request reply can include
		special X-Kannel headers but
		these are only accepted if this
		variable is set to true. See
accept-x-kannel-headers	bool	Extended headers.

60