Manuals / Nokia / Computer Equipment / Network Card

Nokia WAP and SMS gateway manual GSM modem

Models: WAP and SMS gateway

1 116

Download 116 pages 31.95 Kb

Page 50

		Chapter 5. Setting up a SMS Gateway
smsc-username = foo
smsc-password = foo
Variable	Value	Description
		Machine that runs SMSC. As IP
		(10.11.12.13) or hostname
host (m)	hostname	(host.foobar.com)
		The port number for the
port (m)	port-number	connection to the SMSC.
		The ’username’ of the
		Messaging Entity connecting to
smsc-username (m)	string	the SMSC.
		The password matching the
		"smsc-username" your
smsc-password (m)	string	teleoperator provided you with.
		Optional, the time between
		attemps to connect to an SMSC
		having failed to connect initating
		or during an session. The default
reconnect-delay	number	is 10 seconds.
		Optional, source address TON
		setting for the link. (Defaults to
source-addr-ton	number	1).
		Optional, source address NPI
		setting for the link. (Defaults to
source-addr-npi	number	1).
		Optional, destination address
		TON setting for the link.
dest-addr-ton	number	(Defaults to 1).
		Optional, destination address
		NPI setting for the link. (Defaults
dest-addr-npi	number	to 1).
		Optional, sets the default
		priority of messages transmitted
		over this smsc link. (Defaults to
priority	number	0, which is the highest priority)

GSM modem

Kannel can use a GSM modem as an SMS center.

group = smsc

smsc = at

modemtype = wavecom

device = /dev/ttyS0

43

Image 50

Nokia WAP and SMS gateway manual GSM modem

Contents

Kalle Marjola Open Source WAP and SMS gatewayLars Wirzenius Andreas FinkAarno Syvänen Bruno RodriguesStipe Tolj Kannel 1.3.1 User’s Guide Open Source WAP and SMS gateway Table of Contents Extended headers Kannel Post XML Post Fake messages Fakesmsc command line options List of Tables ViiIntroduction Overview of WAPOverview of WAP Push Overview of SMS Introduction FeaturesRequirements This section needs to be writtenPage Finding the documentation Installing the gatewayGetting the source code Compiling the gateway Installing Kannel from RPM packages Installing the gatewayUsing pre-compiled binary packages Removing Kannel Log in as root Remove the RPM package Installing Kannel from DEB packages Installing the gatewayIf you don’t want Kannel to run as a daemon, run Installing the gateway Install or upgrade the DEB packageRemove the package completely Page Conﬁguration ﬁle syntax Using the gatewayConﬁguring the gateway Inclusion of conﬁguration ﬁles Core conﬁguration Variable Value DescriptionBool Layer. Defaults to no With admin-port, this can beLower network layer. Defaults IP-listseveral addresses, separated withﬁlename VariableValueIP or ’*’ Handle them properly. This is String to unify received phoneNumbers, for Smsc routing Receiving SMS messages fromSMS service requests to Using this variable, no SMSﬁlename Down violently Enable the use of an Http Only, i.e. for the administrationKannel is willing to trust when Type Default this is set to ’internal’When Kannel message queues Working as a Https client. IfStarting the gateway Command line optionsRunning Kannel After the bearer box, you can start the WAP boxUsing the gateway Set debug-places for ’debug’ level output Kannel statusesHttp administration Shutdown a single Smsc link. Password Bring down the gateway, by setting state toSpace. Password required No other chance to resume normal operationWapbox conﬁguration Setting up a WAP gatewayWAP gateway conﬁguration Adds a single mapping for Default gives you 10 mappingsMap-url setting. Thus, Left side URL to the givenRunning WAP gateway Checking whether the WAP gateway is aliveSMS gateway conﬁguration Setting up a SMS GatewayRequired components SMS centersSee below for a complete list Problems, so avoid it and anySpecify the used SMS-service An optional name or id forEntries are separated with Which are accepted to be sentThrough this SMSC. Multiple Semicolon ’’. For exampleNokia Cimd 1.37 Feature Setting up a SMS GatewayValue. Set it to 0 to disable this Machine that runs the SmscSend a message, it will remove All messages sent fromKannel. If Kannel is asked to This preﬁx from the senderService Connecting over a modem to anDefaults to send. All outgoing Or hostnameMore than this time. Defaults to Keepalive command will beFeature. Requires username or If set, only connections fromDefaults to the maximum Disconnect/reconnect, defaultWhen this parameter is unset or Error ocurSmpp Password matching Transceiver modeUse value 0 to disable this I/O Attempt to use aThat no more than 10 default Default if not set isNot deﬁned the default device Change the interface versionVariableValue Sema Group SMS2000 OIS 4.0 SM/ASI for CriticalPath InVoke SMS Center GSM modem Modem Type Modems Probably other Nokia phones Default value 0 means to try toNokia 6210, 7110, 8210 tested TooFor this many seconds. If Using the ’message-storage’To work with this setting are Optional phone numberBefore ﬁrst command String to use when trying toOptional. Defaults to false Command, enable thisFake Smsc HTTP-based relay and content gateways Featurecimd Using multiple SMS centersFeature checklist Sema Ois At2 HttpCan send 8 bits Correctly send GSM alphabet Smsc driver internal featuresCan set Validity Can set Deferred Can set PID Can set RPI Can send octet data without UDHSymbol Meaning Smsbox conﬁgurationAn smsbox connected to an Smsbox Group VariablesOptional smsbox instance Bearerbox for the purposeSendsms-charsstring Global-sender Typical ’smsbox’ group could be something like this Non-zero valueInstance the routing rules do Smsbox routing inside bearerboxDeﬁnes for which smsbox ApplySMS-service conﬁgurations URL corresponds to one Services are identiﬁed byWord Message contains If the service has aliases, they Word in the SMS messageChecked using white/black-list You use this sms-service typeUse these kind of services is Service. b Multiple entries areAllow only inbound SMS to Service. This may be used toAllowed to this service Certain shortcut numbers to beIf client does not set Content-Type for reply, it isUsed for url type services, NormallyFormat from numhash.h header Black-list service is deﬁnedSee notes of phone number ﬁleHow sms-service interprets the Http response Extended headers SMSPush equivalent Kannel HeaderParameter escape code Kannel Header Equivalent Kannel PostXML Post Hex formatSetting up a SMS Gateway SendSMS-user conﬁgurations Some sample ’sendsms-user’ groups MySQL DLR storage External delivery report DLR storageInternal DLR storage LibSDB DLR storageDLR database ﬁeld conﬁguration Sample ’dlr-db’ group VariableTable ﬁeld that is used for the timestamp data MySQL connection conﬁguration Over-The-Air conﬁgurationsDescription of the service Ota-setting. Any string isFor your WAP services, i.e Defaults to data14. OTA Bookmark Group Variables Setting up more complex servicesA ’sendsms-user’ to use with it. With concatenation enabled Ota-bookmark. Any string isRedirected replies Setting up operator speciﬁc servicesSetting up multi-operator Kannel Running SMS gateway Using the Http interface to send SMS messages’Authorization failed’ reply Returned Content can be more thanBits or to UCS2. Defaults to Phone number of the senderIndicator. The accepted values Default-smscvariable canIndicator bits in DCS ﬁeld. If Indicator, or 5,6,7,8 forOptional. If given, kannel will Conﬁguration, or 0X per defaultIndicator RPI value. See Etsi Inform SMS Center that it shouldUsing the Http interface to send OTA conﬁguration messages GET method for the OTA Http interfaceBookmark document looks like this When a XML document is Name or ID of the ’ota-setting’Not given the ﬁrst ’ota-setting’ Conﬁguration, or ’AuthorizationRunning SMS&WAP gateway Setting up a SMS&WAP gatewaySMS&WAP gateway conﬁguration PPG core group conﬁguration variables Setting up Push Proxy GatewayConﬁguring ppg core group, for push initiator PI interface Mandatory value. Tells that weConﬁguring PPG user group variables String An user String Password for this userWap-push-user String Username for this userFinishing ppg conﬁguration You can, of course, use more complex command line options An example using Http SmscSetting up Push Proxy Gateway Running a push proxy gatewayDefault network and bearer used by push proxy gateway Using SSL for Http Using SSL client supportUsing SSL for Http Using SSL server support for the sendsms Http interfaceUsing SSL server support for PPG Https interface Delivery Reports Getting help and reporting bugs Appendix A. Using the fake WAP sender Running Kannel with fakesmsc connections Appendix B. Using the fake SMS centerSetting up fakesmsc Fake messages Fakesmsc command line optionsSwitch Value Description Send a maximum of max Creating push content and control document for testing Starting necessary programs Instead of default si service Table C-1. Testppg’s command line optionsUse content qualiﬁer string Default any. Application101 Using Nokia Toolkit as a part of a developing environmentTesting PAP protocol over Https Directive Value Description String User’s password 103 ﬁlename Document Mandatory value. PPG serviceString User’s username Mandatory value. PPG service Add the following lines to /etc/ppp/options.server Appendix D. Setting up a dial-up lineAnalog modem 104This section needs to be written 105 Isdn terminalConﬁgure your phone this example is for Nokia Log rotation Bearerbox Access LogAppendix E. Log ﬁles Appendix E. Log ﬁles 107Coding GlossaryMClass Bibliography RFC 2616 Hypertext Transfer Protocol -- HTTP/1.1 Society 109