Nokia WAP and SMS gateway manual SendSMS-user configurations

Chapter 5. Setting up a SMS Gateway

SendSMS-user configurations

To enable an SMS push, you must set sendsms-portinto the ’smsbox’ group and define one or more ’sendsms-user’ groups. Each of these groups define one account, which can be used for the SMS push, via HTTP interface (see below)

Table 5-10. SendSMS-User Group Variables
Variable	Value	Description
group (m)	sendsms-user	This is a mandatory variable
username (m)	string	Name for the user/account.
		Password for the user (see
password (m)	string	HTTP interface, below)
name	string	As in ’sms-service’ groups.
		As other deny/allow IP lists, but
		for this user (i.e. this user is not
user-deny-ip	IP-list	allowed to do the SMS push
user-allow-IP	IP-list	HTTP request from other IPs
		than allowed ones). If not set,
		there is no limitations.
		Force SMSC ID as a ’string’
		(linked to SMS routing, see
forced-smsc	string	’smsc’ groups)
		If no SMSC ID is given with the
		send-sms request (see below),
		use this one. No idea to use with
default-smsc	string	forced-smsc.
		This number is set as sender if
		not set by from get/post
default-sender	phone-number	parameter
faked-sender	phone-number	As in ’sms-service’ groups
max-messages	number
concatenation	bool
split-chars	string
split-suffix	string
omit-empty	bool
header	string
footer	string

67