10 Hookups (cont’d)
Connecting to a TV Only
TV has Component Video In Jacks
Back of TV
(example only)
RIGHT AUDIO IN | Y |
LEFT AUDIO IN | Pb/Cb |
| Pr/Cr |
L
2 1
DIGITAL AUDIO OUT
| 1 |
|
| 1 |
|
|
| ||
|
|
| L |
|
|
| L |
|
|
|
|
| 2 |
|
| 2 |
|
|
|
|
|
| R | L | (CVBS) | PR/CR | PB/CB | Y | (Y/C) |
COAXIAL | OPT OUT | SUB WF OUT | AUDIO OUT | VIDEO OUT |
| VIDEO OUT |
| ||
1
Connect the Pr/Cr Pb/Cb Y VIDEO OUT jacks on the
DVD Player to the corresponding Pr/Cr Pb/Cb Y VIDEO
IN jacks on the TV. Use a Pr/Cr Pb/Cb Y cable (not supplied).
2
Connect the supplied red and white audio cables to one set of the Left and Right AUDIO OUT jacks on the DVD Player. Connect the other end of the cables to the left/right AUDIO IN jacks on the TV. Match the cable colors to the jack colors.
3
Connect the power cords of the DVD Player and the TV to the power outlet. Turn on the power of the TV and the DVD Player.
4
Set the TV to the correct Component Video In channel.
Such channels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1 or EXT2, etc. These channels often are near channel 00. See your TV owner’s manual for details. Or, continue to change channels at the TV until you see the DVD Player’s screen saver on the TV screen.
Helpful Hint
•Your TV may have a different jack panel than the one shown. You will only need the jacks shown on this page for this hookup.
