8 General Information
Putting Batteries in the Remote Control
1
Remove the battery compartment lid on the back of the remote control by pressing in the tab, then lifting off the lid.
2
Place two AA batteries inside the battery compartment with their + and – ends aligned as indicated. Do not mix old and new
batteries or different types of batteries (standard, alkaline, etc.).
3
Replace the battery compartment lid.
Using the Remote Control
Unless stated otherwise, the remote control can perform all operations. Always point the remote control directly at the remote sensor on the front of the DVD Player, not the TV. Details are on page 20. Make sure there are no barriers between the remote control and the DVD Player.
Environmental Information
Your system consists of materials that can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
Safety Information
●Do not expose the system to excessive moisture, rain, sand, or heat sources.
●Place the DVD Player on a firm, flat surface.
●Keep the DVD Player away from domestic heating equip- ment and direct sunlight.
●When placing the DVD Player in a cabinet, allow about one inch of space all around the DVD Player for ventilation.
Cleaning Discs
●When a Disc becomes dirty, clean it with a cleaning cloth. Wipe the Disc from the center out, in a straight line.
●Do not use solvents such as benzine, thinner, commercially available cleaners, or
●If the DVD Player cannot read Discs correctly, use a com- monly available cleaning CD/DVD to clean the lens. Other cleaning methods may destroy the lens. Always keep the tray closed to avoid dust on the lens.
●The lens may cloud over if you suddenly move the DVD Player from cold to warm surroundings. Playing a Disc is not possible then. Leave the power on for about one hour with no Disc in the unit until normal playback is possible.
- | + |
+ | - |
