Philips DVD712 owner manual Back of TV

14 Hookups (cont’d)

Connecting to a TV and a Multi-channel Receiver that has 2-channel digital stereo (PCM) or supports Dolby DigitalTM , MPEG2, or Digital Theater System

Receiver

(example only)

COAXIAL DIGITAL

AUDIO IN

		Back of TV
		(example only)
1	2	S-VIDEO IN

DIGITAL AUDIO OUT

1 PCM-MPEG2-Dolby Digital-DTS 1

L
			2			2
			R	L	(CVBS)	PR/CR PB/CB	Y	(Y/C)
COAXIAL	OPT OUT	SUB WF OUT	AUDIO OUT		VIDEO OUT	VIDEO OUT		S-VIDEO OUT

1

Connect one of the DVD Player’s DIGITAL AUDIO OUT jacks (COAXIAL or OPT(ical) OUT) to the corresponding digital audio in jack on your Stereo Receiver. You only need one connection. Use a digital audio cable (not supplied).

2

Connect an S-Video cable to the S-VIDEO OUT jack of the DVD Player and to the corresponding S-VIDEO IN jack on your TV. Or, use the CVBS VIDEO OUT jack (using the supplied yellow video cable) or Component VIDEO OUT jacks. Details are on pages 10 and 12. You only need one video connection.

3

You may connect a subwoofer (not supplied) to the SUB WF. OUT jack on the DVD Player. Follow the instructions sup- plied with the subwoofer.

4

Connect the power cords of all the equipment to power outlets. Turn on the power of the TV, Stereo Receiver, and DVD Player.

5

Set the TV to the correct Video In channel. These channels often are near channel 00. See your TV manual. Or, change TV channels until you see the DVD logo on the TV screen.

Set your Stereo Receiver to the correct Audio In channel or sound source. Refer to the Stereo’s manual.

6

Set the DVD Player’s digital output. Details are on page 45.

Helpful Hints

•If your Digital Output setting does not match your Stereo’s capabilities, the Stereo may produce a strong, distorted sound or no sound at all.

•Six Channel Digital Surround Sound via digital connection can only be obtained if your Stereo has a Digital Multichannel Decoder.

•Your Stereo must support MPEG2, Dolby DigitalTM or Digital Theater System (DTS). Check the Stereo’s manual.

•When playing MP3 files, you may not hear sound if you used the DIGITAL AUDIO OUT jacks. See page 40 for details.