After connecting the DVD Player to your TV and other equipment, you may need to change the DVD Player’s Digital Output setting. Look to see which DVD Player audio jacks you connected to your other equipment, then set your Digital Output accordingly. The information in step 4 will help you make your choice.
1
Press SYSTEM MENU. 
will be selected.
2
Press p repeatedly to select G, then press B.
3
Digital output will be selected. Press the B button.
4
Press o or p to select Off, PCM only, or All, then press the
OK button.
●Select All if you used the COAXIAL (Digital Audio Out) jack to connect the DVD Player to Stereo Receiver that has a Multi- channel Decoder. Details are on page 14.
All is the preset factory setting.
●Select Off if you did not use either of the COAXIAL or OPT OUT (Digital Audio Out) jacks. For example, if you used the sup- plied red and white audio cables to connect the AUDIO OUT jacks of the DVD Player to a TV or Stereo, select Off.
●Select PCM only if you used the COAXIAL or OPT OUT (Digital Audio Out) jacks of the DVD Player for connections, but the audio equipment does not include a digital
Z Y 
d
1en 1en 1 2
| Digital output | spOff |
| Analog output | PCM only |
G | Night mode | All |
5
Press the SYSTEM MENU button to remove the menus.
Digital Output 45
1,5 
2-4
