16 Playing a Disc
DVD 
AUDIO CD 
VIDEO CD
1
Press the POWER ON/OFF button on the front of the DVD Player to turn on the DVD Player.
Turn on your TV. Make sure it is set to the correct Video In channel. You should see the DVD logo on the TV screen. Details are on page 9.
DVD 712 DVD/VIDEO CD/CD PLAYER |
|
|
|
POWER ON/OFF | SOUND |
|
|
|
| PLAY | |
|
| PREV | NEXT |
| OPEN / CLOSE | PAUSE | STOP |
1 | |||
2
Press OPEN/CLOSE on the front of the DVD Player to open the disc tray. Load your Disc in the tray, with the label facing up. If the Disc is
3 |
| |
Press OPEN/CLOSE again to close the tray. READING |
| |
flashes on the DVD Player’s display. Playback may begin auto- | 4 | |
matically. | ||
4 | ||
6 | ||
If DVD playback does not start automatically, a Disc menu | ||
may appear. If the Title or Chapter selections are numbered, | ||
press a Number button to select an item. Or, press the p | ||
o s B buttons to select an item, then press OK. The num- |
| |
ber of the current Title and Chapter will appear on the display |
| |
panel. Playback will begin. |
| |
If Audio CD playback does not start automatically, press |
| |
PLAY B to begin Audio CD playback. |
|
5
Playback will stop at the end of the Title or after the last Track.
6
To stop playback at any time, press STOP C.
To resume playback at the point at which you last stopped play- back on a DVD, press PLAY B. While you see Resume IB on the TV screen, press PLAY B again.
The resume feature applies not only to the current DVD, but also to the last four discs you played. Reload a Disc and press the RESUME button. Or, press PLAY B while you see Resume IB on the TV screen.
Helpful Hints
•If the Disc is Locked by Access Control, you must enter the 4- digit code or authorize the Disc. Details are on pages
•DVDs have a region code. Your Player will not play discs that have a region code different from the region code of your Player. The Player’s region code is 1 (one). Details are on page 7.
•Resume may not be available with some DVDs.
