Eton E4 owner manual Activating and Deactivating the Alarm, Sleep Timer, Top of the display

E4 WORLD RECORDER MANUAL

SETTING THE ALARM TO PLAY MUSIC FROM A SD/MMC CARD OR FLASH MEMORY

1.Turn on the radio and select SD/MMC or flash memory mode to play. See the section titled SWITCH BETWEEN FLASH MEMORY AND SD/MMC CARD, below.

2. With the radio turned off press ENTER, then press SW.	flashes in
the top of the display.

3.Enter the alarm time with the numeric keypad and press ENTER or press ENTER if you wish to use the existing alarm time.

4.Press the volume buttons to set the desired volume at the alarm time and press ENTER or press ENTER if you choose to use the existing volume. Note that the sleep timer appears in the display.

5.Use the numeric key to set the time that the alarm is activated, from 00-99 minutes, or press ENTER to use the existing time. The display goes back to the normal clock display.

ACTIVATING AND DEACTIVATING THE ALARM

After setting the alarm with any of the methods described above, it’s activated. To deactivate it, turn the radio off and press FM, MW or SW corresponding to the symbol you wish to choose (the symbol flashes at the top of the display), then press EXIT. To reactivate it, turn the radio off and press FM or MW or SW, then press ENTER.

SLEEP TIMER

With the radio on, do a long press of the EXIT button. The sleep timer symbol and - - flash in the upper right corner of the display. Enter the time that you want the radio to play in minutes, 01-99, with the numeric keys. The radio plays for that amount of time, with the sleep timer sym- bol and the number of minutes in the display, after which it turns off.

16