Important Safety Instructions

SAVE THESE INSTRUCTIONS!

This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Tripp Lite Inverter/Chargers.

Location Warnings

•Install your Inverter/Charger (whether for a mobile or stationary application) in a location or compartment that minimizes exposure to heat, dust, direct sunlight and moisture.

•Although your Inverter/Charger is moisture resistant, it is NOT waterproof. Flooding the unit with water will cause it to short circuit and could cause personal injury due to electric shock. Never immerse the unit, and avoid any area where standing water might accumulate. Mounting should be in the driest location available.

•Leave a minimum of 2" clearance at front and back of the Inverter/Charger for proper ventilation. To avoid automatic Inverter/Charger shutdown due to overtemperature, any compartment that contains the Inverter/Charger must be properly ventilated with adequate outside air flow. The heavier the load of connected equipment, the more heat will be generated by the unit.

•Do not install the Inverter/Charger directly near magnetic storage media, as this may result in data corruption.

•Do not install near flammable materials, fuel or chemicals.

Battery Connection Warnings

•The Inverter/Charger will not operate (with or without utility power) until batteries are connected.

•Multiple battery systems must be comprised of batteries of identical voltage, age, amp-hour capacity and type.

•Because explosive hydrogen gas can accumulate near batteries if they are not kept well ventilated, your batteries should not be installed (whether for a mobile or stationary application) in a “dead air” compartment. Ideally, any compartment would have some ventilation to outside air.

•Sparks may result during final battery connection. Always observe proper polarity as batteries are connected.

•Do not allow objects to contact the two DC input terminals. Do not short or bridge these terminals together. Serious personal injury or property damage could result.

Equipment Connection Warnings

Do not use a Tripp Lite RV Inverter/Charger in life support or healthcare applications where a malfunction or failure of a Tripp Lite RV Inverter/Charger could cause failure of, or significantly alter the performance of, a life support device or medical equipment.

•Corded models: Do not modify the Inverter/Charger’s plug or receptacle in a way that eliminates its ground connection. Do not use power adapters that will eliminate the plug’s ground connection.

•Connect your Inverter/Charger only to a properly grounded AC power outlet or hardwired source. Do not plug the unit into itself; this will damage the device and void your warranty.

•You may experience uneven performance results if you connect a surge suppressor, line conditioner or UPS system to the output of the Inverter/Charger.

Operation Warnings

•Your Inverter/Charger does not require routine maintenance. Do not open the device for any reason. There are no user serviceable parts inside.

•Potentially lethal voltages exist within the Inverter/Charger as long as the battery supply and/or AC input are connected. During any service work, the battery supply and AC input connection (if any) should therefore be disconnected.

•Do not connect or disconnect batteries while the Inverter/Charger is operating in either inverting or charging mode. Operating Mode Switch should be in the OFF position. Dangerous arcing may result.

93-2144, 200510095 specifications

The Tripp Lite 200510095, also referred to as the 93-2144 model, is a versatile networking and connectivity solution designed to meet a myriad of needs in both personal and professional environments. Designed with the modern user in mind, this product showcases a blend of robust performance features, cutting-edge technology, and a user-friendly design that sets it apart from its competitors.

At its core, the Tripp Lite 200510095 excels in providing reliable connectivity options. It supports a variety of network types, including Ethernet and USB, ensuring compatibility with a wide array of devices and systems. This feature is particularly beneficial for users who need to connect multiple devices simultaneously, allowing for seamless data transfer and communication without the need for excessive cabling.

One of the standout characteristics of the Tripp Lite 200510095 is its compact and durable design. Constructed with high-quality materials, this device is built to withstand the rigors of daily use, making it suitable for both home offices and more demanding professional settings. The sleek design also ensures that it can blend easily into various environments without taking up excessive space.

In terms of performance, the Tripp Lite 200510095 offers impressive data transmission speeds, often exceeding industry standards. This high-performance capability means users can enjoy faster uploads and downloads, enabling more efficient workflows. Additionally, the device is optimized for minimal latency, which is crucial for applications that require real-time data processing, such as online gaming or video conferencing.

Safety and reliability are also key aspects of the Tripp Lite 200510095. The device is equipped with built-in surge protection, safeguarding connected devices from unexpected power surges and fluctuations. This feature not only extends the lifespan of devices but also provides peace of mind for users who rely on their technology for critical tasks.

Overall, the Tripp Lite 200510095, 93-2144 model, is a commendable choice for anyone seeking a dependable and efficient networking solution. Its combination of versatility, performance, and security makes it a valuable addition to any digital setup, catering to the needs of individuals and businesses alike. Whether for improving home office efficiency or enhancing a corporate network, this device stands as a powerful ally in navigating the demands of today's technology-driven world.