Tripp Lite 93-2144, 200510095 owner manual Service, Maintenance, Troubleshooting

Page 12

Service

If you are returning your Inverter/Charger to Tripp Lite, please pack it carefully, using the ORIGINAL PACKING MATERIAL that came with the unit. Enclose a letter describing the symptoms of the problem. If the Inverter/Charger is within the warranty period, enclose a copy of your sales receipt. To obtain service you must obtain a Returned Material Authorization (RMA) number from Tripp Lite or an authorized Tripp Lite service center.

Maintenance

Your Inverter/Charger requires no maintenance and contains no user-serviceable or replaceable parts, but should be kept dry at all times. Periodically check, clean and tighten all cable connections, as necessary, both at the unit and at the battery.

Troubleshooting

Try these remedies for common Inverter/Charger problems before calling for assistance. Call Tripp Lite Customer Service at (773) 869-1234 before returning your unit for service.

MAX

OFF

(GREATER

(LESSER

LOAD

LOAD

ON)

ON)

Battery Indicator Lights

Operating Mode Switch

Operation Indicator Lights

SYMPTOM

PROBLEMS

CORRECTIONS

No AC Output

Unit is not properly connected to utility power

Connect unit to utility power.

(All Indicator Lights are OFF)

Operating Mode Switch is set to “OFF” and AC input

Set Operating Mode Switch to “AUTO/REMOTE” or “CHARGE ONLY”.

 

is present.

 

 

This is normal when the Operating Mode Switch is set to

No correction is required. AC output will return when AC input

 

“CHARGE ONLY” and AC input is absent.

returns. Set Operating Mode Switch to “AUTO/REMOTE” if you

 

 

require AC output.

 

Circuit breaker is tripped.

Reset circuit breaker.

 

Unit has shut down due to battery overcharge (preventing

Disconnect any auxiliary chargers. Reset by moving Operating Mode

 

battery damage). The problem may be with connected

Switch to “OFF”. Wait 1 minute and switch to “AUTO/REMOTE” or

 

auxiliary chargers, if any, or with the unit’s charger.

“CHARGE ONLY.” If unit remains in shutdown mode after several

 

 

attempts to reset, contact Tripp Lite Customer Service for assistance.

 

Unit has shut down due to excessive battery discharge.

Use an auxiliary charger* to raise battery voltage. Check external

 

 

battery connections and fuse. Unit automatically resets when

 

 

condition is cleared.

 

Unit has shut down due to overload.

Reduce load. Reset by moving Operating Mode Switch to “OFF”.

 

 

Wait 1 minute. Switch to “AUTO/REMOTE” or “CHARGE ONLY”.

Battery Not Recharging

Connected batteries are dead.

Check and replace old batteries.

(AC Input Present)

Battery fuse* is blown.

Check and replace fuse.*

 

Battery cabling* is loose.

Check and tighten or replace cabling.*

 

Unit has shut down due to battery overcharge (preventing

Disconnect any auxiliary chargers. Reset by moving Operating Mode

 

battery damage). The problem may be with connected

Switch to “OFF”. Wait 1 minute and switch to “AUTO/REMOTE” or

 

auxiliary chargers, if any, or with the unit’s charger.

or “CHARGE ONLY.” If unit remains in shutdown mode after several

 

 

attempts to reset, contact Tripp Lite Customer Service for assistance.

 

Input circuit breaker is tripped.

Reset circuit breaker.

All Three Battery Indicator Lights

Battery is excessively discharged.

Use an auxiliary charger* to raise battery voltage. Check external

Are Slowly Flashing.

 

battery connections and fuse. Unit automatically resets when

(½ Second Flashes)

 

condition is cleared.

All Three Battery Indicator Lights

Battery is overcharged. Unit will shut down to prevent

Disconnect any auxiliary chargers. Reset by moving Operating Mode

Are Rapidly Flashing

battery damage. The problem may be with connected auxiliary

Switch to “OFF”. Wait 1 minute and switch to “AUTO/REMOTE” or

(¼ Second Flashes)

chargers, if any, or with the unit’s charger.

“CHARGE ONLY.” If unit remains in shutdown mode after several

 

 

attempts to reset, contact Tripp Lite Customer Service for assistance.

Red “LOW” Battery

Battery voltage is low. Unit will automatically shut down

Make sure that AC power is present in order to recharge batteries.

Indicator Light Is Flashing

after 5 seconds to protect battery from damage.

Reset by moving Operating Mode Switch to “OFF then to

 

 

“AUTO/REMOTE” or “CHARGE ONLY”.

 

False reading due to undersized or

Use sufficient size DC cable sufficiently connected to

 

insufficiently connected DC cabling.

Inverter/Charger.

Red “LOAD” Operation

Inverter is overloaded. Unit will automatically shut down

Reduce load. Reset by moving Operating Mode Switch to “OFF”.

Indicator Light flashing

after 5 seconds.

Wait 1 minute. Switch to “AUTO/REMOTE” or “CHARGE ONLY”.

* User-supplied.

12R

200510095 93-2144

 

Page 11 Page 12
Image 12
Page 11 Page 12
Contents Contents RV Series v DC-to-AC Inverter/ChargersSpecifications Limited WarrantyImportant Safety Instructions Battery Connection WarningsLocation Warnings Equipment Connection WarningsFeature Identification 16 †Switch Modes Indicator LightsResetting Your Inverter/Charger to Restore AC Power OperationConfiguration Set Configuration DIP SwitchesGroup a DIP Switches All Models Group B DIP Switches Not on 612 ModelsLimited overcharge of all cells. This can Maximum speed and your RV 12V DCBattery Selection Select Auxiliary Battery Type if anyDetermine Total Wattage Required Mounting Vehicular and Non-Vehicular Horizontal MountBattery Connection VehicularAC Input/Output Connection Connection for Models with Cords and ReceptaclesService MaintenanceTroubleshooting

93-2144, 200510095 specifications

The Tripp Lite 200510095, also referred to as the 93-2144 model, is a versatile networking and connectivity solution designed to meet a myriad of needs in both personal and professional environments. Designed with the modern user in mind, this product showcases a blend of robust performance features, cutting-edge technology, and a user-friendly design that sets it apart from its competitors.

At its core, the Tripp Lite 200510095 excels in providing reliable connectivity options. It supports a variety of network types, including Ethernet and USB, ensuring compatibility with a wide array of devices and systems. This feature is particularly beneficial for users who need to connect multiple devices simultaneously, allowing for seamless data transfer and communication without the need for excessive cabling.

One of the standout characteristics of the Tripp Lite 200510095 is its compact and durable design. Constructed with high-quality materials, this device is built to withstand the rigors of daily use, making it suitable for both home offices and more demanding professional settings. The sleek design also ensures that it can blend easily into various environments without taking up excessive space.

In terms of performance, the Tripp Lite 200510095 offers impressive data transmission speeds, often exceeding industry standards. This high-performance capability means users can enjoy faster uploads and downloads, enabling more efficient workflows. Additionally, the device is optimized for minimal latency, which is crucial for applications that require real-time data processing, such as online gaming or video conferencing.

Safety and reliability are also key aspects of the Tripp Lite 200510095. The device is equipped with built-in surge protection, safeguarding connected devices from unexpected power surges and fluctuations. This feature not only extends the lifespan of devices but also provides peace of mind for users who rely on their technology for critical tasks.

Overall, the Tripp Lite 200510095, 93-2144 model, is a commendable choice for anyone seeking a dependable and efficient networking solution. Its combination of versatility, performance, and security makes it a valuable addition to any digital setup, catering to the needs of individuals and businesses alike. Whether for improving home office efficiency or enhancing a corporate network, this device stands as a powerful ally in navigating the demands of today's technology-driven world.
Top Page Image Contents