Tripp Lite 93-2007 (200106010) owner manual Switches, Indicator Lights & Other Features

Page 11

AC Connection continued

AC Output Electrical Connection (All corded models)

Simply plug your equipment into the unit’s AC receptacles. If adapters must be used, choose adapters that provide a connection to ground.

Set Operating Mode Switch

•Switch to “AUTO/REMOTE” when you are using connected equipment. ADVANTAGE: Uninterruptible power supply. Provides battery backup power during blackouts or brownouts.

Note: When the switch is in the “AUTO/REMOTE” position, you can operate a user-supplied switch to transfer between battery-backup and charge-only modes. (See Remote Connector manual for more information.)

•Switch to “CHARGE ONLY” when you are not using connected equipment. (WARNING! APS will not provide battery backup!) ADVANTAGES: A) Continues to charge battery when power is present, and B) Turns OFF the APS’s inverter, preventing battery drain during blackouts or brownouts.

•Switch to “OFF” to completely turn off the APS and connected equipment or to reset the APS after it has shut down due to overload or overheating.

Switches, Indicator Lights & Other Features

(See Diagrams 9a and 9b, p. 39 and 40 to locate the following switches, indicator lights and other features.)

Switches

1.Operating Mode Switch (All models): This switch selects the APS operating mode (either “AUTO/REMOTE”, “OFF” or “CHARGE ONLY”). See “Set Operating Mode Switch”, pg. 11 to select the optimum setting for this switch.

2.“CONFIGURATION SWITCHES”—DIP Switch Group A (All models): These four switches must be set for the type of battery your APS will be connected to and the voltage points at which your APS will switch to battery power. See “Configuration”, pg. 5 to select the optimum settings for these switches.

3.“CONFIGURATION SWITCHES”—DIP Switch Group B (Select models only): These DIP Switches allow you to equalize the internal resistance of your battery’s cells and set the percentage of your model's maximum load at which the APS will limit battery charging. See “Configuration”, pg. 6 to select the optimum settings for these switches.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents APS PowerVerter Introduction Circuit Board Protection Stage Battery ChargerFrequency-Controlled Inverter Output Operation Warnings Battery Connection WarningsAPS Location Warnings Equipment Connection WarningsSelect Low AC Voltage Switch To ConfigurationDIP Switch Group a All models Select High AC Voltage Switch ToLoad SHARING/EQUALIZE Battery Charge Battery Charger Limiting PointsSetting Procedure Equalize Battery Charge DIP Switch #3, Group BSelecting Battery Amp Hour Capacity Battery SelectionSelecting Battery Type DC Vehicular Battery ConnectionStandard AC Input Electrical Connection All corded models AC ConnectionDC Ground Connection AC Output Electrical Connection All corded models Switches, Indicator Lights & Other FeaturesSet Operating Mode Switch SwitchesIndicator Lights Other Features Service Maintenance & ServiceMaintenance Symptom Problems Corrections Inverter Specifications Corded ModelsSpecifications Hardwired Models See Hardwire Electrical Connections, pg Diagrams/EsquemasVolts Basic 12VDC Vehicular Battery Connection. See Pg Corded Model Modelo con Cable Hardwired Model Modelo con Toma Directa al Circuito

93-2007 (200106010) specifications

Tripp Lite 93-2007 (200106010) is a high-quality audio-visual interface designed to facilitate seamless connection between various devices. This device is particularly popular in professional settings such as conference rooms, educational environments, and home theaters, where robust performance and unerring reliability are essential.

One of the primary features of the Tripp Lite 93-2007 is its extensive compatibility. The device supports a wide range of formats, making it suitable for use with multiple devices like projectors, televisions, and computer systems. Its ability to handle both analog and digital signals ensures users can enjoy exceptional audio and video quality without compromise.

Tripp Lite has engineered the 93-2007 with advanced technology that minimizes signal degradation. It employs high-quality shielding to protect against electromagnetic interference (EMI) and radio frequency interference (RFI). This shielding is vital for maintaining the integrity of signals over longer distances, making it suitable for setups in large venues where distance can impact performance.

The build quality of the Tripp Lite 93-2007 is noteworthy, with durable connectors that provide a secure fit and resist wear and tear over time. This longevity ensures that users will not have to frequently replace cables, creating a more efficient installation process. Moreover, the connectors are designed for easy plug-and-play functionality, allowing for quick setup and disconnection, ideal for fast-paced environments where time is critical.

Another key characteristic of the Tripp Lite 93-2007 is its ability to support high-definition resolutions. Whether you're working with 720p, 1080p, or even 4K content, this device guarantees sharp and clear imagery. As the demand for high-definition content continues to rise, having a reliable interface that can handle various resolutions is essential.

In addition to its performance, the Tripp Lite 93-2007 is engineered to be user-friendly. Its compact design allows for straightforward management of cables, reducing clutter. Moreover, it is compatible with various mounting systems, ensuring flexibility in installations.

The Tripp Lite 93-2007 (200106010) stands out as a versatile and reliable solution for audio-visual connectivity. Its comprehensive features, durable design, and high-quality performance make it an excellent choice for both professional and personal applications. Users can trust this device to deliver top-notch audio-visual experiences that meet the demands of modern technology.
Top Page Image Contents