Tripp Lite 93-2007 (200106010) owner manual Indicator Lights

Page 12

Switches, Indicator Lights & Other Features continued

Indicator Lights

4.“LINE” (All models): This green light will turn continuously ON whenever connected equipment is receiving utility-supplied AC power and your APS is set to “AUTO/REMOTE”, meaning that it will provide battery backup if utility power fails. It will flash intermittently when connected equipment is receiving utility power and your APS’s Operating Mode Switch is set to “CHARGE ONLY” to warn you that the APS’s inverter is OFF and that the APS WILL NOT provide battery backup during blackouts, brownouts or overvoltages.

5.“INV” (Inverting—all models): This yellow light will turn continuously ON whenever connected equipment is receiving battery-supplied AC power (during a blackout, brownout or overvoltage while connected to utility power or when connected to batteries during vehicular operation).

6.“LOAD” (All models): This red light will turn continuously ON when the APS’s load is between 80% and 110% of capacity. The light will flash intermittently when the APS’s inverter shuts down due to a severe overload or overheating. If this happens, turn Operating Mode Switch OFF. Remove the overload and let the unit cool. You may then turn the APS ON after it cools.

7.“CUT/BOOST” (VRI models only): These lights will turn ON whenever your APS is automatically correcting high (CUT) or low (BOOST) AC line voltage. This is a normal, automatic operation of your APS that does not drain battery power, and no action is required on your part.

8.“BATTERY HI/MED/LO” (All models): These three lights will turn ON in several sequences to show the approximate charge level and voltage of your connected battery bank and alert you to several fault conditions:

BATTERY CHARGE INDICATION (Approximate)

Indicator

Capacity

 

Green

91%

- Full

Green & yellow

81%

- 90%

Yellow

61%

- 80%

Yellow & red

41%

- 60%

Red

21%

- 40%

All three lights off

1% - 20%

Flashing red

0% (Inverter shutdown)

All three lights flash slowly*

Excessive discharge

All three lights flash quickly**

Overcharge

*Approximately 1/2 second on, 1/2 second off. See Troubleshooting section. ** Approximately 1/4 second on, 1/4 second off. May also indicate a battery charger fault exists. See Troubleshooting section.

12

Image 12
Contents APS PowerVerter Introduction Stage Battery Charger Frequency-Controlled Inverter OutputCircuit Board Protection Battery Connection Warnings APS Location WarningsEquipment Connection Warnings Operation WarningsConfiguration DIP Switch Group a All modelsSelect High AC Voltage Switch To Select Low AC Voltage Switch ToBattery Charger Limiting Points Load SHARING/EQUALIZE Battery ChargeEqualize Battery Charge DIP Switch #3, Group B Setting ProcedureBattery Selection Selecting Battery TypeSelecting Battery Amp Hour Capacity Battery Connection StandardDC Vehicular AC Connection DC Ground ConnectionAC Input Electrical Connection All corded models Switches, Indicator Lights & Other Features Set Operating Mode SwitchSwitches AC Output Electrical Connection All corded modelsIndicator Lights Other Features Maintenance & Service MaintenanceService Symptom Problems Corrections Specifications Corded Models InverterSpecifications Hardwired Models Diagrams/Esquemas See Hardwire Electrical Connections, pgVolts Basic 12VDC Vehicular Battery Connection. See Pg Corded Model Modelo con Cable Hardwired Model Modelo con Toma Directa al Circuito

93-2007 (200106010) specifications

Tripp Lite 93-2007 (200106010) is a high-quality audio-visual interface designed to facilitate seamless connection between various devices. This device is particularly popular in professional settings such as conference rooms, educational environments, and home theaters, where robust performance and unerring reliability are essential.

One of the primary features of the Tripp Lite 93-2007 is its extensive compatibility. The device supports a wide range of formats, making it suitable for use with multiple devices like projectors, televisions, and computer systems. Its ability to handle both analog and digital signals ensures users can enjoy exceptional audio and video quality without compromise.

Tripp Lite has engineered the 93-2007 with advanced technology that minimizes signal degradation. It employs high-quality shielding to protect against electromagnetic interference (EMI) and radio frequency interference (RFI). This shielding is vital for maintaining the integrity of signals over longer distances, making it suitable for setups in large venues where distance can impact performance.

The build quality of the Tripp Lite 93-2007 is noteworthy, with durable connectors that provide a secure fit and resist wear and tear over time. This longevity ensures that users will not have to frequently replace cables, creating a more efficient installation process. Moreover, the connectors are designed for easy plug-and-play functionality, allowing for quick setup and disconnection, ideal for fast-paced environments where time is critical.

Another key characteristic of the Tripp Lite 93-2007 is its ability to support high-definition resolutions. Whether you're working with 720p, 1080p, or even 4K content, this device guarantees sharp and clear imagery. As the demand for high-definition content continues to rise, having a reliable interface that can handle various resolutions is essential.

In addition to its performance, the Tripp Lite 93-2007 is engineered to be user-friendly. Its compact design allows for straightforward management of cables, reducing clutter. Moreover, it is compatible with various mounting systems, ensuring flexibility in installations.

The Tripp Lite 93-2007 (200106010) stands out as a versatile and reliable solution for audio-visual connectivity. Its comprehensive features, durable design, and high-quality performance make it an excellent choice for both professional and personal applications. Users can trust this device to deliver top-notch audio-visual experiences that meet the demands of modern technology.