Tripp Lite 675 PNP, 450 PNP, 300 PNP owner manual Storage & Service, Specifications

Page 6

Storage & Service

Storage

First turn your UPS OFF and disconnect its power cord from the wall outlet. Then disconnect all equipment to avoid battery drain. If you plan on storing your UPS for an extended period of time, fully recharge the UPS batteries once every three months by plugging the UPS into a live AC outlet and letting the UPS charge for 4 to 6 hours. If you leave your UPS batteries discharged for an extended period of time, they will suffer a permanent loss of capacity.

Service

If returning your UPS for service, contact your local Tripp Lite dealer or distributor. They will refer you to a service center. Please carefully pack the UPS using the ORIGINAL PACKING MATERIAL that came with the unit. Enclose a letter describing the symptoms of the problem. If the UPS is within the warranty period, enclose a copy of your sales receipt.

Specifications

OmniSmart 300 PNP

OmniSmart 450 PNP

OmniSmart 675 PNP

Output Capacity (VA/Watts):

300/180

450/300

675/425

Battery Runtime (Half Load/

 

 

 

Full Load) Minutes:

17/5

17/5

17/5

Battery Recharge Time:

2-4 hrs.

2-4 hrs.

2-4 hrs.

Approvals:

UL, cUL, NOM

UL, cUL, NOM

UL, cUL, NOM

Modem/Fax Protection

 

 

 

(starts at 260V):

1 line

1 line

2 line

OmniSmart 850 PNP

OmniSmart 1050 PNP

OmniSmart 1400 PNP

Output Capacity (VA/Watts):

850/570

1050/680

1400/940

Battery Runtime (Half Load/

 

 

 

Full Load) Minutes:

26/9

23/7

24/8

Battery Recharge Time:

2-4 hrs.

2-4 hrs.

2-4 hrs.

Approvals:

UL, cUL, NOM

UL, cUL, NOM

UL, cUL, NOM

Modem/Fax Protection

 

 

 

(starts at 260V):

 

OmniPro 280

OmniPro 450

OmniPro 675

Output Capacity (VA/Watts):

280/175

450/300

675/425

Battery Runtime (Half Load/

 

 

 

Full Load) Minutes:

17/5

17/5

17/5

Battery Recharge Time:

2-4 hrs.

2-4 hrs.

2-4 hrs.

Approvals:

UL, cUL, NOM

UL, cUL, NOM

UL, cUL, NOM

Modem/Fax Protection

 

 

 

(starts at 260V):

1 line

2 line

ALL MODELS:

Input Voltage/Frequency (120V/60 Hz); On-Line Input Voltage Range (75 - 147 volts); Voltage-Regulated Output Voltage Range (120V +6% / -12%); On Battery Output Voltage Range (120V +/- 5%); Output Waveform Line Mode (filtered sinewave); Output Waveform Battery Mode (PWM sine wave); AC Surge Suppression (exceeds IEEE 587 Cat. A & B standards); AC Noise Attenuation (>40 dB); AC Protection Modes (H to N, H to G, N to G).

FCC Part 68 Notice (U.S. only)

If your Modem/Fax Protection causes harm to the telephone network, the Telephone Company may temporarily discontinue your service. If possible, they will notify you in advance. If advance notice isn’t practical, you will be notified as soon as possible. You will be advised of your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper operation of your equipment. If it does, you will be given advance notice to give you an opportunity to maintain uninterrupted service. If you experience trouble with this Modem/Fax Protectionequipment, please contact the Manager of Technical Support, Tripp Lite; 1111 W. 35th Street, Chicago, Illinois 60609; Phone: (773) 869-1234, for repair/warranty information. The telephone company may ask you to disconnect this equipment from the network until the problem has been corrected or you are sure the equipment is not malfunctioning. There are no repairs that can be made by the customer to the Modem/Fax Protection. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs. (Contact your state public utility commission or corporation commission for information.)

6

Image 6
Contents Quick Installation UPS Location Warnings SafetyBattery Warnings UPS Connection WarningsQuick Installation Set your UPS’s OFF on SwitchOptional Installation Test your UPSs battery charge SwitchesSilence the UPS alarm Basic OperationIndicator Lights Other UPS FeaturesService Storage & ServiceSpecifications StorageInstalación Rápida Advertencias Sobre la Conexión SeguridadAdvertencias Sobre la Instalación Advertencias Sobre la Conexión de EquiposInstalación Rápida Instalación OpcionalInterruptores Silenciar de la alarma de apagonesOperación Básica Posición on encendidoLuces Indicadoras Arrancar en frío el no-break / sistema UPSAlmacenaje y Servicio Otras Características de este No-break / Sistema UPSAlmacenaje Especificaciones ServicioInstallation Rapide Recommandations relatives à la Connexion du Matériel Recommandations Relatives à l’Emplacement de lUPSRecommandations Relatives à la Connexion de lUPS Recommandations relatives à la BatterieInstallation Rapide Installation FacultativeCommutateurs Amortir l’alarme du système d’UPSOpération de Base Tester la charge de la batterie de votre système d’UPSVoyants de Signalisation Autres Dispositifs d’UPSRéceptacles C.A Entreposage Entreposage & ServicePorte de Remplacement de la Batterie Port Série DB9 Disponible sur les modèles choisisCaractéristiques Tous Modeles

450 PNP, 300 PNP, 675 PNP, 675 specifications

Tripp Lite is a well-known name in the world of power protection and connectivity solutions. Among its extensive product range, the Tripp Lite 675, 675 PNP, 300 PNP, and 450 PNP stand out for their reliability and innovative features. These models cater to a variety of power needs, making them suitable for both professional and personal use.

The Tripp Lite 675 is designed for simple, efficient power protection. With surge protection and noise filtering capabilities, it shields sensitive electronic devices from harmful voltage spikes and electromagnetic interference. It offers a compact design that works well in various settings, including home offices and entertainment centers. One of its main features is a built-in circuit breaker that prevents overload, ensuring safety for connected devices.

The 675 PNP (Plug-N-Play) model introduces user-friendly enhancements, allowing for quick setup. This version comes with multiple outlets that accommodate various plug styles, making it versatile for different devices. Its power conditioning technology ensures a stable power supply, while the integrated LED indicators provide real-time status updates for users. This model is particularly beneficial for those who need ease of use alongside reliable performance.

For heavier-duty requirements, the 300 PNP and 450 PNP models go a step further. They come equipped with higher wattage capacities, catering to larger setups, such as home theaters or small server rooms. The 300 PNP also boasts advanced surge protection features, including automatic voltage regulation, which stabilizes fluctuating voltage levels. This is critical for maintaining the longevity of connected equipment.

The 450 PNP, on the other hand, includes more advanced features such as USB charging ports, which are essential for modern devices. With an emphasis on both performance and convenience, this model supports quick charging while maintaining its power protection capabilities. The additional outlets and power conditioning technology ensure that users can connect multiple devices without sacrificing safety or efficiency.

In summary, the Tripp Lite 675, 675 PNP, 300 PNP, and 450 PNP represent a range of power solutions that prioritize safety, ease of use, and advanced technology. With their various features tailored to different needs, these models are ideal choices for anyone looking to secure their electronic devices from power disturbances while ensuring they remain functional and efficient.