Tripp Lite 2-9USTAND owner manual Installation continued, Post Telecom Mounting, Mounting Tower

Contents Important Safety Instructions InstallationTroubleshooting Battery ReplacementBattery Warnings SAVE THESE INSTRUCTIONSUPS Location Warnings UPS Connection Warnings4-Post Mounting Mounting Rack2-Post Telecom Mounting Installation continuedMounting Tower InstallationImporant continuedSafety Instructions 1 Plug your UPS’s line cord into an electrical outlet2 Plug your equipment into your UPS 3 Turn your UPS ON4 External Battery Connection 2 USB and RS-232 SerialCommunications all models 3 EPO Port Connection all modelsUPS Power ON Alarm SilenceUPS Self-Test UPS Cold StartBasic Operation continued Front Panel Indicator Lights continuedExternal Battery Pack Connector configuration varies by model Use to connect optional Tripp Lite Battery Packs for additional runtime. Contact Tripp Lite Customer Support at 773 869-1234 for the appropriate Tripp Lite battery pack to connect. Refer to instructions available with the Battery Pack for complete connection information and safety warnings Communications Rear Panel continuedapplications Troubleshooting Troubleshooting continued This indicates that utility power is too highadequate space for air to circulate near or low for the UPS to operate in BYPASSProcedure 1 Remove Front Panel 2 Disconnect Batteries3 Remove/Dispose of Batteries 4 Add Batteries 5 Connect Batteries 6 Replace Front PanelService Storage773.869.1234 USA 773.869.1212 International 1111 W. 35th Street, Chicago, IL 60609 USA200811139 93-2471EN