Tripp Lite 2-9USTAND Procedure, Remove Front Panel 2 Disconnect Batteries, Replace Front Panel

Contents Installation Important Safety InstructionsTroubleshooting Battery ReplacementSAVE THESE INSTRUCTIONS Battery WarningsUPS Location Warnings UPS Connection WarningsMounting Rack 4-Post Mounting2-Post Telecom Mounting Installation continuedMounting Tower 1 Plug your UPS’s line cord into an electrical outlet InstallationImporant continuedSafety Instructions2 Plug your equipment into your UPS 3 Turn your UPS ON2 USB and RS-232 Serial 4 External Battery ConnectionCommunications all models 3 EPO Port Connection all modelsAlarm Silence UPS Power ONUPS Self-Test UPS Cold StartFront Panel Indicator Lights continued Basic Operation continuedExternal Battery Pack Connector configuration varies by model Use to connect optional Tripp Lite Battery Packs for additional runtime. Contact Tripp Lite Customer Support at 773 869-1234 for the appropriate Tripp Lite battery pack to connect. Refer to instructions available with the Battery Pack for complete connection information and safety warnings Communications Rear Panel continuedapplications Troubleshooting This indicates that utility power is too high Troubleshooting continuedadequate space for air to circulate near or low for the UPS to operate in BYPASS1 Remove Front Panel 2 Disconnect Batteries Procedure3 Remove/Dispose of Batteries 4 Add Batteries 5 Connect Batteries 6 Replace Front PanelStorage Service773.869.1234 USA 773.869.1212 International 1111 W. 35th Street, Chicago, IL 60609 USA200811139 93-2471EN