Tripp Lite OMNI750ISO warranty Specifications

SURGE VOLTAGE WITHSTAND CAPABILITY: ANSI/IEEE C62.41 Catagories A & B 6KV/200/500 amp 100Khz Ringwave and category B BiWave

SURGE VOLTAGE ATTENUATION: N-G 2000:1, L-G 240:1, L-N 100:1

INSERTION LOSS: 65 db N-G from 10Khz to 100Khz, 45 to 60 db L-G from 10Khz to 100Khz, 18 to 54 db L-N from 50Khz to 500 Khz

6 UPS-supported AC outlets; 6-ft. cord

5 diagnostic LEDs indicate AC present, on battery, voltage correction status, overload and battery low/replace 2-year product warranty

Specifications

SYSTEM OVERVIEW

Voltage compatibility	120V
Frequency	60Hz
compatibility
OUTPUT
Output VA	750
Output watts	500
Output nominal	120V (line mode) ; 115V (battery mode)
voltage
Output voltage	Line Mode: Sine wave line voltage 120V (+8%/-18%) / BATTERY MODE: 115V (+/-5%)
regulation
Output frequency	Line Mode: Passes line frequency of 60Hz. +/-10%
regulation
Outlet quantity / type	6 NEMA 5-15R
INPUT
Maximum input	5.5A
amps
Input connection	NEMA 5-15P
type
Input cord length	6ft./1.8m
Recommended	15A, 120V
Electrical Service
BATTERY
Full load runtime	13 min. (750VA/500W)
Half load runtime	31 min. (375VA/250W)
DC system voltage	36VDC
Typical battery	4-6 years (typical)
lifespan
Battery recharge rate	2-4 hours to 90%
Replacement	RBC51 (3 required)
Battery Cartridge

VOLTAGE REGULATION

Voltage regulation description

Overvoltage correction

Brownout correction

Severe brownout correction

Line-interactive UPS offers two boost levels of brownout correction and one voltage reduction level for overvoltage correction to maintain usable, computer grade output

Input voltages between 128-143V are reduced by 9%

Input voltages between 97-107V are boosted by 10%

Input voltages between 81-96V are boosted by 21%

LEDS ALARMS & SWITCHES

Front panel LEDs

5 front-panel status indicactor LEDs for line power, battery power, voltage regulation, overload and battery low/replace status