Tripp Lite operation manual SRC-2X, number 1 Channel 1, Basic parameters

SRC-2X Installation and Operation Manual

Setup Menu Options
Change Setup:
0	Server configuration
1	Channel 1 configuration
3	E-mail settings
5	Expert settings
6	Security
7	Factory defaults
8	Exit without save
9	Save and exit	Your choice ?

c - Select option 1 and press Enter.

d - To enter a value for a parameter, type the value and press Enter, or to confirm a current value, just press Enter.

SRC-2X, number 1: Channel 1, Basic parameters

Hardware:	Ethernet
IP Address:	192.168.001.017
Baud rate:	9600
I/F mode:	4C
Flow:	00
Port No:	10001
Remote IP Address:	192.168.001.016
Remote Port No:	10001
Connect mode:	C1
Disconnect Mode:	00
Flush Mode:	00

When you are finished, save the new configurations (option 9). The SRC-2X will now reboot. Go back to step 1 of “Quick Start Application Example - 2” to set up the second SRC-2X, but enter the Channel 1 data listed below.

SRC-2X, number 2: Channel 1, Basic parameters

Hardware:	Ethernet
IP Address:	192.168.001.016
Baud rate:	9600
I/F mode:	4C
Flow:	00
Port No:	10001
Remote IP Address:	192.168.001.017
Remote Port No:	10001
Connect mode:	C1
Disconnect Mode:	00
Flush Mode:	00

When you are finished, save the new configurations (option 9). The unit reboots. Any data transferred in SRC-2X, will appear in the 2nd SRC-2X and vice-versa.

e-mail:support@broadcasttools.com voice: 360.854.9559 fax: 360.854.9479

NOTE:

The IP addresses used here are examples ONLY.

WEBSITE:

Visit our web site for product updates and additional information

QUICK START

10