Tripp Lite operation manual Change Setup, SRC-2X, Channel 1, Basic parameters

Page 8

SRC-2X Installation and Operation Manual

Setup Menu Options
Change Setup:
0	Server configuration
1	Channel 1 configuration
3	E-mail settings
5	Expert settings
6	Security
7	Factory defaults
8	Exit without save
9	Save and exit	Your choice ?

c - Select option 1 and press Enter.

d - To enter a value for a parameter, type the value and press Enter, or to confirm a current value, just press Enter.

SRC-2X, Channel 1, Basic parameters

Hardware:	Ethernet
IP Address:	192.168.001.017
Baud rate:	9600
I/F mode:	4C
Flow:	00
Port No:	10001
Connect mode:	C0
Disconnect Mode:	00
Flush Mode:	00

When you are finished, save the new configurations (option 9). The SRC-2X will now reboot.

Your SRC-2X is ready to go. Set your Windows application to match the SRC-2X’s IP address and port number.

NOTE:

The IP addresses used here are examples ONLY.

WEBSITE:

Visit our web site for product updates and additional information

			QUICK START
e-mail:support@broadcasttools.com	voice: 360.854.9559	fax: 360.854.9479	8
			8

Image 8

Contents SRC-2XEthernet Serial Remote Control WHO to Contact for Help Safety InformationIntroduction Installation Product DescriptionSetup Product & Version RequestOutput Quick Start Information you’ll need to knowQuick Start Application Example Windows Socket connectionChange Setup SRC-2X, Channel 1, Basic parametersSerial Bridge/Tunneling SRC-2X, number 1 Channel 1, Basic parameters SRC-2X, number 2 Channel 1, Basic parametersSerial Tunneling Fax SRC-2X, number 3 Channel 1, Basic parameters SRC-2X, number 4 Channel 1, Basic parametersCom Port Redirector Setup Menu Options Email Notification via input triggering SRC-2X, E-mail settings Specifications TCP/IP, UDP/IP, ARP, ICMP, SNMP, TftpLimited Warranty