FCC Radio / TV Interference Notice

Selecting the printer through software controls:

When in Windows, use the software provided to select the desired printer port. If in DOS, use the Hot Key commands to select the printer port. (Hot Keys ONLY function in DOS and will not work in Windows). See the Read.me file on the CD.

Broadcast Mode:

Can only be used when all printers are identical. Sends a print job to all printers simultaneously. All LEDs are illuminated when the switch is in this mode.

About the Software:

The software allows you to directly select any PORT, or select all PORTS at once in broadcast mode. This software ONLY needs to be installed when you are using the switch in 1-to-4 mode (1 PC to 4 Printers). For additional information on this software please view the READ.ME file included on the driver CD.

Troubleshooting:

IMPORTANT: First check that all cables are connected properly. If they are, then connect the printer directly to the computer to determine if the problem involves the switch. If it does, then proceed with this section.

1.LED locks on the PORT when a cable is connected:

•An errant signal may trigger a “timeout” count. Wait until the “timeout” counter reaches zero (in 15 or 45 seconds)

•Set DIP Switch #1 to the ON position (RESET position). Return the DIP switch to the NORMAL setting and retry.

•If the Printer is a Hewlett Packard or an EPSON Stylus 400, 600, or 800 series, take the following steps to disable the printer’s status checking procedure.

1.In Windows 95 click the Start button, select Settings and then select Printers.

2.Double left-click on the correct printer Icon.

3.Activate the Printer pull-down menu and select Properties.

4.Select the tab titled Details (located above the Printer Properties window).

5.Select the Spool Settings button. The “enable bi-directional support for this printer” selection must NOT be checked and the “disable bi-directional support for this printer” selection must be checked. Then press OK.

6.Select the Port Settings button. The box labeled “Check Port Status before printing” must NOT be checked. Then click OK.

2.The Printer status window shows “Printer not Responding” or “Cable not Connected” intermittently.

•Make sure that only one printer status monitor (bi-directional) is installed in your system. If more than one is installed the printer drivers for those printers will “fight” for control of the LPT port causing error messages to appear in one or the other of the status monitors. Follow the same 6 step procedure shown above.

•If the above does not resolve the problem, add the correct power adapter to your Auto Switch.

3.Error messages show up during or immediately after you install new printer drivers.

•Uninstall other bi-directional printer status windows before installing a new one. Then follow the 6 step procedure found above.

•Before installing the driver, use the manual selection button to “Lock” on to the specific printer or remove the Auto Switch and connect the printer directly to the PC.

•After installing the new print drivers, reconnect the printer to the switch (if it had been disconnected) and restart Windows so that the Auto Switch can properly emulate the new bi-directional printers responses.

4.Status window can not display printer status properly.

•Change your computer’s LPT port type to either standard or EPP and installing the drivers again.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: reorient or relocate the receiving antenna; increase the separation between the equipment and receiver; connect the equipment into an outlet on a circuit different from that which the receiver is connected; consult the dealer or an experienced radio/television technician for help. The user must use shielded cables and connectors with this product. Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

LIFETIME LIMITED WARRANTY

TRIPP LITE warrants its products to be free from defects in materials and workmanship for life. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment which has been damaged by accident, negligence or misapplication or has been altered or modified in any way.

B170-004-R specifications

The Tripp Lite B170-004-R is a versatile and efficient solution designed for seamless connectivity between multiple HDMI devices. This compact switch is especially useful for households, offices, and entertainment venues where you need to manage multiple HDMI inputs, allowing users to easily select between different sources without the hassle of unplugging and replugging cables.

One of the standout features of the B170-004-R is its ability to support four HDMI inputs, enabling users to connect devices such as Blu-ray players, gaming consoles, and streaming devices all at once. The switch can handle high-definition video resolutions up to 4K (3840 x 2160) at 30Hz, ensuring that you experience crystal clear images every time. Additionally, it supports a range of audio formats, including DTS-HD, Dolby TrueHD, and LPCM, delivering high-fidelity sound alongside the stunning visuals.

The B170-004-R employs advanced technologies such as HDMI 2.0, which not only increases bandwidth but also ensures compatibility with a wider range of devices and content types. The unit is also HDCP compliant, preventing any hassle with copyright issues when playing protected content. Moreover, it comes equipped with automatic switching technology that detects the active input and switches accordingly, making it an extremely user-friendly option.

With a compact and sleek design, the B170-004-R is built to fit seamlessly into any setup, whether it be a home theatre system or a conference room. The simple push-button interface allows easy manual switching between HDMI inputs, providing flexibility for users. The built-in LED indicators also help keep track of which input is currently active, ensuring that users can effortlessly manage their devices.

Durability is another characteristic of the Tripp Lite B170-004-R. Constructed with high-quality materials, it’s designed to withstand frequent use over time. Additionally, it has a plug-and-play setup, meaning no software or drivers are required for installation, allowing users to get started right out of the box.

In summary, the Tripp Lite B170-004-R is an exceptional HDMI switcher that caters to both casual users and tech enthusiasts alike. With its robust features, support for high-definition content, and ease of use, it stands out as an essential component for anyone looking to streamline their HDMI connections and elevate their viewing experience.