SIEMENS ADSL E-110_E-110-I user manual
Problem Troubleshooting Suggestion
Cannot access the Configuration
Manager program from your
browser.
Use the ping utility to check whether your PC can communicate with
the ADSL Router’s LAN IP address (by default 192.168.1.1). If it cannot,
check the Ethernet cabling.
Verify that you are using Internet Explorer v5.0 or later, or Netscape
Navigator v4.7 or later. Support for Javascript® must be enabled in
your browser. Support for Java® may also be required.
Verify that the PC’s IP address is defined as being on the same subnet
as the IP address assigned to the LAN port on the ADSL Router.
Changes to Configuration
Manager are not being retained.
Be sure to use the Commit function (Admin > Commit & Reboot) after
any changes.
Upgrading
Error Message Possible cause Action
invalid checksum The firmware file to be used is
damaged or the file format is wrong.
Make sure that your firmware file format is
valid or get a new firmware file.
invalid hardcode The firmware file is not compatible
with the model of your ADSL Router.
Download a compatible firmware from the
Web.
unknown flags type The firmware version is not compatible. Download a compatible firmware from the
Web.
internal isfs error /
internal flashfs error
System error occurs. It may cause by
the lack of memory.
Reboot your ADSL Router and perform the
upgrade task again.
invalid file format The firmware file format is invalid. Check the file format is correct, otherwise
download a firmware file with correct
format.
get an error message The TFTP server responses with error
message.
Make sure the file name you enter is
correct. Otherwise the TFTP server may
response with the error message “File not
found”.
transfer time out The transfer session is interrupted. a. Make sure the TFTP server is on the
same subnet with the ADSL Router.
b. Make sure you the IP address of the
TFTP server you specify is correct and
that your TFTP server is started.
c. If error still occurs, reboot your ADSL
Router and perform the upgrade task
again.
firmware update in
process
The upgrade is already in process Do not turn off your ADSL Router
otherwise you will cause damage to the
device
no remote server IP The IP address of the TFTP server is not
specified
Specify the IP address of the TFTP server is
not specified.
can’t allocate update
buffer
It may cause by the lack of memory. Reboot your ADSL Router and perform the
upgrade task again.
80 Rev:01_040220