Siemens E-110-I Field Description Status Select Start or StartOnData, Service Name, Login Name

SIEMENS ADSL E-110_E-110-I user manual

Field	Description
Status	Select Start or StartOnData.
	Start - To establish connection whenever you turn on the ADSL Router.
	StartOnData - To establish connection whenever the device gets request to
	connect to the Internet, such as when you open browser requesting for Web
	pages.
Protocol	Select PPPoA or PPPoE as required by your ISP.
Service Name	For PPPoA, no need to set up.
	For PPPoE, enter the Service Name if this is required by your ISP. Otherwise
	leave it blank.
Use DHCP	Select Disable unless your ISP instructs you to enable this service.
Use DNS	Select Enable
Default Route	Select Enable
Security Protocol	Select PAP or CHAP as required by your ISP.
Login Name	Enter the login name given by your ISP.
Password	Enter the password given by your ISP.

4.After entering the fields above, click [Apply].

5.When confirmation page appears, click [Close].

6.You will return to the PPP Configuration page and see the newly added PPP entry.

The Oper. Status Link Up indicates the link is currently up.

Part 2: Check your connection status.

Select Home. On the System View page, the WAN Interfaces item should display the interface you created to communicate with your ISP. A green ball in the Status field indicates a successful connection.

Part 3: Configuring the PC.

Keep your PC’s setting as a DHCP client. No further configuration is required.

76 Rev:01_040220