Siemens E-110-I user manual Rear PanelRear Panel, Ethernet, 9V 1A

SIEMENS ADSL E-110_E-110-I user manual

Rear PanelRear Panel

The following figure illustrates the rear panel of your ADSL Router.

ADSL	Connects the device to an ADSL telephone jack using the supplied cable.
USB	Connects the device to the USB port on your PC.
Ethernet	Connects the device to your PC's Ethernet port, or to the uplink port on your LAN's hub,
	using the cable provided.
Reset Button	Reset to factory defaults.
	To reset the device to factory defaults, you don’t need to power off the device. Just
	push a paper clip into the hole. Press down the button for 3 times and then release.
	Then wait for the device to finish boot-up.
9V 1A	Connects to the supplied power converter cable.

4 Rev:01_040220