Before You Use
Before You Use The SIEMENS ADSL E-110/E-110-I is an Asymmetric Digital Subscriber Line (ADSL) Router. With the
asymmetric technology, this device runs over standard copper phone lines. In addition, ADSL allows you to
have both voice and data services in use simultaneously all over one phone line.
The SIEMENS ADSL E-110/E-110-I is designed to offer cost-effective high-speed services for home or office
users. It provides a downstream rate of up to 8 Mbps and upstream rate of up to 1 Mbps for ADSL
connection, even offers auto-negotiation capability for different flavors (ANSI T1.413 Issue 2, G.lite, G.dmt
for Annex A, G.dmt for Annex B or G.hs) according to central office DSLAM’s settings (Digital Subscriber
Line Access Multiplexer). Also the feature-rich routing functions are seamlessly integrated to ADSL service
for existing corporate or home users. Now users can enjoy various bandwidth-consuming applications via
the SANTIS ADSL Router.
Features
ADSL Compliance
• ANSI T1.413 Issue 2
• ITU G.992.2 Annex A (G.lite)
• ITU G.992.1 Annex A (G.dmt)
• ITU G.992.1 Annex B (G.dmt)
• ITU G.994.1 (G.hs)
ATM Fea ture s
• Compliant to ATM Forum UNI 3.1 / 4.0 Permanent Virtual Circuits (PVCs)
• Support up to 8 AAL5 Virtual Circuit Channels (VCCs) for UBR, CBR and GFR service classes
• Provides ATM layer functionality
• Provides adaptation layer (AAL5) functionality
• Performs the traffic shaping and scheduling per ATM port
• Supports PPP encapsulation over ATM (PPPoA) and PPP over Ethernet (PPPoE)
• ADSL-aware CAC
• Support for F5 AIS, RDI and loopback cells
Bridging Features
• Up to 1000 hosts
• Supports transparent bridging as specified in IEEE 802.1D Transparent Bridging
• Supports bridged PDU encapsulation (RFC 2684)
• MAC-level filter to accept/deny packets based on rules applicable at the MAC level
Routing Features
• Network Address Translation (NAT)
• IP filtering and raw filtering
• Dynamic IP address allocation is supported through DHSP and IPCP
• Point-to-point Protocol (PPP): PPPoA, PPPoE, PAP or CHAP for user authentication, Routing information
Protocol (RIP) v1 and v2
Security Features
• PAP (RFC1334), CHAP (RFC1994) for PPP session
• Firewall support IP packets filtering based on IP address/Port number/Protocol type and TCP code field
flags
• Intrusion Detection provides protection from a number of attacks (such as SYN/FIN/RST Flood, Smurf,
WinNuke, Echo Scan, Xmas Tree Scan, etc)
Rev:01_040220 1