SIEMENS ADSL E-110_E-110-I user manual
2. Creating a IPoA interface. 1. Select Wan > IPOA.
2. On the IOoA Configuration page click [Add] to add a new IPoA interface.
3. Enter the provided fields as below:
Field Description
IPoA Interface Select an IPoA interface from the available interfaces, e.g. ipoa-0.
Conf. IP Address Enter the IP address given by your ISP, e.g. 10.100.17.89.
Interface Sec Type Select Public
Netmask Enter the IP address given by your ISP, e.g. 255.255.255.248.
RFC 1577 For IPoA select Yes, for 1483 bridge select No
Use DHCP Select Disable
Default Route Select Enable
Gateway IP Address Enter the IP address given by your ISP, e.g. 10.100.17.94.
4. After entering the fields above, click [Apply].
5. When confirmation page appears, click [Close].
6. You will return to the IpoA Configuration page and see the newly added IPoA entry.
Part 2: Check your connection status.
Select Home. On the System View page, the WAN Interfaces item should display the interface you
created to communicate with your ISP. A green ball in the Status field indicates a successful connection.
Part 3: Configuring the PC.
Keep your PC’s setting as a DHCP client. No further configuration is required.
78 Rev:01_040220