Siemens E-110, E-110-I Part 3. Configuring your PCs as DHCP clients , Modifying Address Pools , Viewing Current DHCP Address Assignments

Chapter 4: Advanced Configuration
Part 3. Configuring your PCs as DHCP clients
For each computer that you want to configure to receive IP information automatically, configure the TCP/IP
properties to Obtain an IP address automatically (the actual text may vary depending on your operating
system).
Modifying Address Pools
1. Select Lan > DHCP Server.
2. On the DHCP Server Configuration page select for the entr y to modi fy.
The DHCP Server Pool - Modify page displays:
When modifying an address pool, you are only allowed to:
• Change the domain name associated with the pool.
• Exclude IP addresses within its range from distribution. To excluded an IP address, enter it in the
fields provided and click [Add].
If you want to change other attributes, you must delete the pool and create a new one.
3. After entering your changes, click [Apply]. A confirmation page displays to indicate that the pool has
been modified successfully.
4. Click [Close] to return to the DHCP Server Configuration page.
5. Select Admin > Commit & Reboot and click [Save] to save your changes to per manent storage.
Viewing Current DHCP Address Assignments
To view a table of all current IP address assignments, select Lan > DHCP Server and click [Address Table].
The DHCP Server Address Table is as below.
Rev:01_040220 43