Siemens E-110-I Creating a PPP interface, Select the ATM VC you created, e.g. aal5-0

			Chapter 5: Connection Mode
3.	Enter the provided fields as below:
	Field	Description
	VC Interface	Select a VCC interface from the available interfaces, e.g. aal5-0.
	VPI / VCI	Enter the VPI/VCI values given by your ISP, e.g. 0 / 35.
	Mux Type	For PPPoE select LLC, for PPPoA select VC.
	Max Proto per AAL5	Keep the default 2.
4.	After entering the fields above, click [Apply].
5.	When confirmation page appears, click [Close].
6.	You will return to the ATM VC Configuration page and see the newly added ATM VC entry.

2. Creating a PPP interface.

1.Select Wab > PPP.

2.On the PPP Configuration page click [Add] to add a new PPP interface.

3.Enter the provided fields as below:

Field	Description
PPP Interface	Select a PPP interface from the available interfaces, e.g. ppp-1.
ATM VC	Select the ATM VC you created, e.g. aal5-0.
Interface Sec Type	Select Public

Rev:01_040220 75