SIEMENS ADSL
Managing Current IP Filter Sessions
1.Select Services > IP Filter. The IP Filter Configuration page displays.
2.To view all current IP sessions, click [Session]. The IP Filters Session page displays. It displays the following fields:
Field | Description |
Session Index | The ID assigned by the system to the IP session (all sessions, whether or not they |
| are affected by an IP filter rule, are assigned a session index). |
|
|
Time to expire | The number of seconds in which the connection will automatically expire |
|
|
Protocol | The underlying IP protocol used on the connection, such as TCP, UDP, IGMP, |
| etc.) |
|
|
I/F | The interface on which the IP Filter rule is effective |
|
|
IP Address | The IP addresses involved in the communication. The first one shown is the |
| initiator of the communication. |
|
|
Port | The hardware addresses of the ports involved in the communication |
|
|
In/Out Rule Index | The number of the IP Filter rule that is applies to this session (assigned when the |
| rule was created) |
|
|
In/Out Action | The action (accept, deny, or unknown), being taken on data coming into or |
| going out on the interface. This action is specified in the rule definition. |
|
|
To Block Specific Protocols
1.To block specific protocols running across the system, select Services > Blocked Protocols.
2.Check the protocol type you want to block
3.Click [Apply].
4.Select Admin > Commit & Reboot and click [Save] to save your changes to permanent storage. To unblock the specific protocol, uncheck the protocol and repeat the submit and commit task.
64 | Rev:01_040220 |
