Siemens E-110-I user manual Isdn installation, Isdn NT

SIEMENS ADSL E-110_E-110-I user manual

ISDN installation

If your telephone service is ISDN (SIEMENS ADSL E-110-I), proceed as follows to install your Hardware:

1.Remove the U-Line (incoming line) form your ISDN NT and plug it into the “LINE” plug of the ISDN Splitter. Use another phone line to connect your ISDN NT with your ISDN Splitter. Plug this phone line onto the “PHONE” plug of the ADSL splitter, and plug the other end of the line into the U-Line plug of your ISDN NT.

PHONE port

ISDN	LINE port
U-Line

ISDN NT

MODEM port

2.Use the line to connect the ADSL Microfilter or Splitter and your ADSL LAN port.

3.Please attach one end of the Ethernet cable with RJ-45 connector to the “LAN” port of your ADSL Router.

4.Connect the other end of the cable to the Ethernet port of the client PC.

5.Connect the supplied power adapter to the PWR port of your ADSL Router, and plug the other end to a power outlet.

6.Turn on the power switch.

6 Rev:01_040220