Philips MX5800SA/22S manual Troubleshooting, Problem, Solution

Page 44

E n g l i s h

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

No power.

No picture.

Distorted or poor picture.

Completely distorted picture or black/ white picture.

The aspect ratio of the screen cannot be changed even though you have set the TV display.

No sound or distorted sound.

The DVD system does not work.

Solution

–Check if the AC power cord is properly connected.

–Press the STANDBY ON on the front of the DVD system to turn on the power.

–Refer to your TV’s manual for correct Video In channel selection. Change the TV channel until you see the DVD screen.

–Press DISC on the remote.

–Sometimes a small amount of picture distortion may appear. This is not a malfunction.

–Clean the disc.

–TVs have a colour system standard. If the disc’s or DVD system’s colour system is different than your TV’s colour system, the picture may be distorted or colourless. Set to the correct ‘TV System’ setting.

–The aspect ratio is fixed on the DVD disc.

–Depending on the TV, it may not be possible to change the aspect ratio.

–Adjust the volume.

–Replace the speaker cables.

–Check the speaker connections and settings.

–Disconnect the headphones.

–Press PLAY to resume normal play mode if necessary.

–Press the correct source button on the remote (TV/AV or AUX, for example) to choose the equipment that you want to hear through the DVD system.

–Disconnect the power cord from the power outlet for a few minutes. Reconnect the power cord and try to operate again as usual.

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents MX5800SA Copyright in the U.K How to connect a plugMains plug Page Laserapparat av Klass Index Contents Timer Operations Sound and Volume ControlsTuner Operations Other FunctionsGeneral Information Supplied accessoriesCare and safety information Set up the surround speakers ConnectionsConnecting speakers and twin subwoofer Connections Using S-Video jack Connecting TVUsing Scart jack Connecting the power cord On the DVD systemConnecting a VCR or Cable/Satellite Box Connections optionalRecording digital Connecting digital audio equipmentListening to the playback Main unit and remote control Functional OverviewDisc trays 1~5 IR SensorControl buttons available on the remote only Inserting batteries into the remote control Setting the clockUsing the remote control to operate the system To view the clock time in any active mode Press ClocktimerSetting the TV Changing the NTSC/PAL setting via the remote controlPress DISC/MEDIA on the remote to enter disc mode Selecting the colour system that corresponds to your TVSelecting speaker layout To remove the menuPress System Menu Changing seating control positionThan the front speakers Press OK to confirm Setting language preferenceSetting the speakers’ channels Disc Operations Playable discsPlaying discs Your DVD home cinema system will playUsing the Disc Menu Turning on/off auto Eco standby modeBasic playback controls Resuming playback from the last stopped point DVD/VCDRepeat play mode Selecting various repeat functionsProgramme favourite tracks audio CDs only Repeating a section within a chapter/trackStop playback, then press Çagain Press Ç to stop playback or exit programme modeClearing the programme To erase the entire FTS programme Using the menu bar to programmeTo erase an FTS programme Clearing the programme Playing MP3 discProgramme MP3 disc DVD Menu Options Using the menu barEnter Setup MENU, the playback will pause Using the Setup Menu User Preference Settings Setting the TV shapeImproving the image for Ntsc setting Adjusting the picture position on the TVSelecting a predefined colour setting Fine-tuning the personal colour settingSetting the digital output Setting the PCM output AllPCM only 48 kHzKaraoke vocal turning on/off Setting the analogue outputNight mode turning on/off Status window turning on/off Help text turning on/offPBC Playback Control turning on/off Select this to turn off the help text displayPress System Menu again to remove the menu Changing the passwordYou can change the four-digit code used for Access Control Restricting playback by setting Parental Level Only available in region 1 playersPress System Menu again to remove Rating explanationsLocking/Unlocking the DVD for viewing Enabling Play once/Play Always Changing the country If you later want to lock the disc so it willTV screen Move to Change country and pressTuning to radio stations Presetting radio stationsUsing the Plug and Play Connect the system to the power supplyAutomatic presetting Manual presetting Deleting a preset radio stationActivating/Deactivating the timer Timer OperationsSetting the timer To cancel the sleep timer Setting the Sleep timerTo check or change the setting Sound Control Sound and Volume ControlsVolume control Switching on/off Using the remote to operate your televisionOther Functions Dimming system’s display screenSolution TroubleshootingProblem Troubleshooting Problem SolutionSpecifications Amplifier SectionGlossary

MX5800SA/22S specifications

The Philips MX5800SA/22S is a versatile home audio system designed to deliver high-quality sound and an array of features tailored to enhance your listening experience. This model stands out for its powerful performance, connectivity options, and user-friendly interface, making it an excellent choice for audiophiles and casual listeners alike.

One of the primary features of the MX5800SA/22S is its advanced sound technology. It comes equipped with a robust amplifier that ensures rich and dynamic audio output. The system includes a subwoofer that delivers deep bass, allowing for an immersive listening experience across various music genres, from classical to pop. The speaker design is optimized to produce clear highs and balanced mids, creating a well-rounded sound profile.

Connectivity is a key characteristic of the Philips MX5800SA/22S. The system supports multiple audio sources, including CD playback, USB, and Bluetooth streaming. This versatility enables users to play their favorite music from various devices without hassle. The Bluetooth feature facilitates seamless wireless connectivity, allowing users to stream music directly from their smartphones or tablets.

Another notable aspect of this audio system is its built-in FM tuner, which provides access to a wide range of radio stations. With the ability to save preset channels, users can easily switch between their favorite stations. Additionally, the system supports MP3 playback, enabling users to listen to audio files stored on USB drives.

The user interface is intuitive, featuring a well-designed remote control that makes it easy to navigate through tracks and settings. The clear display screen provides relevant information about the currently playing track, enhancing usability.

Moreover, the MX5800SA/22S boasts sleek and modern aesthetics, making it a stylish addition to any room. Its form factor is compact, allowing it to fit in various spaces without overwhelming the decor. The quality of materials used in construction contributes to its durability, ensuring that it remains a reliable audio solution for years to come.

In summary, the Philips MX5800SA/22S is an outstanding home audio system that combines impressive sound quality, diverse connectivity options, and user-friendly features. Its ability to deliver a rich audio experience, along with its stylish design, positions it as a compelling choice for anyone looking to elevate their listening enjoyment. Whether you are entertaining guests or enjoying a quiet night in, this sound system is sure to enhance the atmosphere.
Top Page Image Contents